Bearings • Conveyor Bearings

Conveyor bearings are inserted into roller tubes that rotate belts in a variety of conveyor systems.

Filter by state

  • VNC Bearing, Inc.

    VNC Bearing supplies screw hanger units used in conveyor systems. These conveyor bearings (pillow blocks) are available in shaft diameters from 1/2 inch to 1 15/16 inches. Conveyor hanger units are self-aligning. This allows them to compensate for alignment errors and the flexing of the shaft.

  • Aetna Bearing Company

    Aetna manufactures self-aligning adapter bearings used in conveyor systems. Available in bore sizes of 3/4", 7/8", 1", 1 1/8", and 1 1/4", these conveyor bearing adapters are designed for use in equipment where shafts are supported in frames or sheet metal surfaces.

  • KMS Bearings, Inc.

    KMS manufactures plastic and ANSI 316 stainless steel conveyor ball bearings that are single or double-rowed. Products feature either hex bore plastic raceways or hex bore 316 stainless raceways, and are available in sizes ranging from 0.10 inch to 2.260 inches.

  • Boston Gear

    Boston Gear manufactures mounted bearings used in conveyor applications. Features include Zerk-type grease fittings, take-up frames, an extended inner race with two set screws, or an eccentric locking collar. These conveyor bearings are available in stamped steel, ductile iron, and cast iron housing styles.

  • Hartford Technologies, Inc.

    Hartford Technologies custom designs and manufactures all-plastic conveyor roller bearings for wash-down systems. Available in a number of materials and sizes, these products are used in the automotive, aerospace, medical, consumer, and agricultural industries.

  • Kilian Mfg. Corp.

    Kilian Manufacturing Corporation produces conveyor ball bearings that feature hex bore of .466/.456 inches. Designed to meet the speed requirements of driven conveyor rolls, these products significantly reduce the noise level of systems, and feature a flanged outer diameter and nylon ball retainer that permits operation up to 2000 RPM.

  • Metallized Carbon Corp.

    Metallized Carbon Corp. manufactures self-lubricating bearings that are used within industrial equipment and environments including conveyor applications. These bearings are for use in severe service applications ranging from high temperatures (1200 F) to cryogenic temperatures (-450 F), and with harsh caustics and strong acids.

  • Ralphs-Pugh

    Ralphs-Pugh offers commercial grade and ABEC-1 precision bearings for conveyor systems. The commercial grade types include plated steel bearings with metal stamped and plastic housings, or stainless steel types with plastic housings. ABEC-1 styles are for moderate to heavy loads and higher speeds.

  • Rolcon LLC

    Rolcon provides four styles of conveyor roller bearings, including precision, semi-precision, non-precision and commercial grade stainless steel types. Precision conveyor roller bearings are used when speeds exceed 400 rpm or when conveying heavy material handling loads across a system. Non-precision types are used for slow to moderate speed system applications.

  • Schatz Bearing Corp.

    Schatz Bearing Corp. manufactures precision-ground, single-row radial conveyor roll bearings that feature heavy duty, double-lip synthetic rubber seals and stub shafts.

  • Conveyor Systems & Engineering Inc

    CS&E manufactures six types of bearings, including ABEC-1, sleeve, extreme, high capacity corrosion-resistant, heavy-duty and special application types for conveyor systems.

  • Frantz Manufacturing Company

    Frantz Manufacturing Co. produces conveyor system components. The company's product line includes precision, semi-precision, and commercial unground non-precision bearings, as well as radial thrust, regreasable and stainless steel conveyor bearings.

  • KD Bearings Inc

    KD manufactures standard-duty roller conveyor bearings for gravity roller conveyors and low-RPM driven rollers. These products have a dynamic load rating of 60 to 100 lbs. and load limits ranging from 21 to 425 lbs. They are available with hex or round bores, labyrinth or seal construction, zinc plating or pre-lubrication.

  • Miller Bearing Company, Incorporated

    Miller Bearing Co. specializes in manufacturing conveyor roller bearings. The company's products include stamped-style or semi-precision flanged, hex or round bore, re-greasable and stainless steel designs.

  • Peer Bearing Co.

    Peer designs round, square bore, hex bore, and hex bore conveyor bearings. Available with single, double, and triple shroud seals, these products are used for agricultural applications including grain and aggregate conveyors.

  • POBCO, Inc.

    Pobco Plastics manufactures conveyor and material-handling components including roller bearings. For drive systems the company offers a variety of self-lubrication roll end bearing materials. For gravity conveyor systems the company produces plastic ball bearings that use precision stainless steel balls.

  • VXB Ball Bearings is a supplier conveyor roller bearings in 12x35.3, 12x47.6, and 12x56.1 sizes. Products are unground and flanged.

  • Ensalco

    Ensalco supplies roller bearings for gravity conveyor rollers that fall into four groups: non-precision, semi-precision, precision, and journal.

  • Frost Inc

    Frost Inc. manufactures standard conveyor bearings for roll sizes ranging from 1.9" to 4" outer diameter. These products are fully-sealed, and engineered for high speed and low noise.