Company Profile

Estco Enterprises

Estco Enterprises, Inc. offers wire protection, well/jack nuts, silicone tapes/press pads, thermoplastic rubber feet, seal/plug/flash master, vibration/shock mounts, liquid tight strain reliefs, circular connectors, and cap plugs. Catalogs are available at no charge upon request. Estco's technical staff can assist with product development, proper tooling cavitation, and production materials to meet any specifications.

For: Estco Enterprises

Company Info

P: 760-489-8745
P: 888-696-7826
F: 760-489-9117
1549 Simpson Way
Escondido, CA

Estco Enterprises Entries

  • ►  Bearings • Bushings 

    For: Entry

    Bushings are a type of plain bearing that are usually inserted into a housing to provide a bearing surface for a variety of rotary applications.

    Estco Enterprises distributes a number of bushing types from Heyco including open/closed universal, snap, threaded & double insulated, thick panel snap, universal & shorty, snub & shorty, open/closed, lay-in & in-line strain relief, straight-thru strain relief and right angle strain relief. Each bushing features flexible shutters that adjust to accommodate and support any shape from .125" to a maximum diameter of 2.470". The bushings also feature fingertip pressure that snap-locks each bushing into its mounting hole.

  • ►  Gaskets • Rubber Gaskets 

    For: Entry

    Rubber gaskets are used as a mechanical seal between two or more surfaces, generally under some amount of compression.

    Estco Enterprises stocks a host of rubber gaskets machined from nitrile, butyl, EPDM, gum rubber, neoprene, Viton, silicone, nylon, polyethylene, polypropylene, styrene, santoprene, vyram, geoflast, and Teflon.

  • ►  Gaskets • Rubber Gaskets • Silicone Gaskets 

    For: Entry

    Estco Enterprises stocks thousands of gaskets including silicone gaskets. The company can also provide custom silicone gaskets.

  • ►  Fasteners • Rivets 

    For: Entry

    Rivets are permanent mechanical fasteners with a head on one end and a buckled tailed created on installation.

    Easto Enterprises provides a number of industrial fasteners including nylon rivets.

  • ►  Bearings • Bushings • Flanged Bushings 

    For: Entry

    Estco Enterprises offers flanged neoprene bushings with brass machine nuts molded into one end. Flanged neoprene bushings are removable as well as dampen vibration, noise and shock.

  • ►  Bearings • Bushings • Nylon Bushings 

    For: Entry

    Estco Enterprises offers Euro strain relief bushings, including a nylon series that complies with IEC publication #335, CEE #10 and #11, and VDE #0720 and #0730 regulations. The company also distributes threaded insulated designs available as 1/8" NPT sized types molded from 6/6 nylon.

  • ►  Bearings • Bushings • Rubber Bushings 

    For: Entry

    Estco Enterprises offers rubber step bushings used to reduce friction and dampen vibration. These products are machined from butyl, EPDM, fluorosilicone, neoprene, nitrile, silicone, natural rubber, and viton. The company also supplies rubber strain relief bushings in a number of types.

  • ►  Connectors • Circular Connectors 

    For: Entry

    Circular connectors are round shaped connectors most commonly used in electronics applications.

    Estco Enterprises offers circular connectors in signal, push-pull, and power configurations. Signal connectors have amp ratings ranging from 8 to 20, voltages ranging from 150 to 400, temperatures ranging from -40 to 257°F, and wire gauges ranging from 28 to 12 AWG. Push-pull connectors have a panel mounted/dual function, locking grooves, and can be easily connected/disconnected even under restricted working conditions. M23 Power connectors have contacts ranging from 2 to 6, amp ratings ranging from 8 to 28, voltages from 300 to 800, and wire gauge ranges from 24 to 12 AWG.

  • ►  Fasteners • Washers • Sealing Washers 

    For: Entry

    Estco Enterprises offers locking/sealing washers constructed from natural nylon 6/6 materials. These washers are capable of creating an interface on the ID of a shank, and on the OD of a hex nut.

  • ►  Connectors • Push-Pull Connectors 

    For: Entry

    Push Pull connectors have a locking mechanism that is released by squeezing the connector body, preventing unintentional disconnects.

    Estco Enterprises offers circular push-pull connectors. These connectors feature threaded male panel mount locking grooves and dual functions suitable for push-pull/screw connections. M23 signal circular connectors are IP67/NEMA 4X certified, and they work in temperature ranges ranging from -40 to 257°F. These connectors come in wire gauges ranging from 28 to 12 AWG, cable outer diameters ranging from 3 to 14mm, voltages ranging from 150 to 300, and Amp ratings ranging from 8 to 20.

  • ►  Gaskets • Adhesive Backed Gaskets 

    For: Entry

    Adhesive backings are applied to a wide range of gasket materials, including: silicone, sponge, foam, solid rubber, sponge rubber, EPDM, neoprene, PVC, etc.

    Estco offers thousands of st and custom fabricated self-adhesive gaskets in neoprene, nitrile, butyl, organic rubber, synthetic rubber, EPDM, polypropylene, vyram, geoflast and many other materials.

  • ►  Rubber • Rubber Extrusions 

    For: Entry

    The process of forming rubber parts and/or components via forcing malleable rubber material through a die of the required shape after which it is commonly cured or hardened.

    Estco Enterprises offers U-channel rubber extrusions constructed from all organic or non-organic (e.g. silicone) compounds. These extrusions come in widths ranging from 3/32" to 1-1/4" and depths ranging from 5/32" to 7/8".

  • ►  Electrical • Conduit & Raceways • Conduit 

    For: Entry


    Estco carries hundreds of conduit types and variants. Highly resistant to abrasion, oil, and solvents and available in 10 mm thru 67 mm nominal sizes. For use with all types of equipment, machinery, pumps, motors, and HVAC equipment.

  • ►  Rubber • Rubber Grommets 

    For: Entry

    Rubber grommets are elastomeric rings used to line holes so that chafing can be prevented when pipes or cables are passed through.

    Estco Enterprises offers standard and MIL-SPEC grommets in a variety of configurations. Heyco rubber grommets come in diameter sizes ranging from 0.250" to 0.562", ID sizes ranging from 0.125" to 0.313", head diameters ranging from 0.344" to 0.813", and heights ranging from 0.188" to 0.438". These grommets feature a variety of water resistant characteristics, operating temperatures ranging from -40 to 221°F, and cover through-hole protection applications.

  • ►  Rubber • Rubber Mounts 

    For: Entry

    Rubber mounts are elastomeric isolators that are commonly used for preventing equipment from being harmed by shock or vibration inputs.

    Estco Enterprises offers motor mounts in a variety of sizes, shapes and types. Series 300 cylindrical mountings have applications for air handling equipment, business machine timing devices, control panels, relays, blowers, fans, and generators. These mountings feature compression loads ranging from 33 to 79 lbs, shear loads ranging from 18 to 40 lbs, and shear force frequencies ranging from 850 to 3600 CPM.

  • ►  Rubber • Rubber Feet 

    For: Entry

    Rubber feet, otherwise known as rubber bumpers, provide stress-cracking, shock, and traction resistance to a wide range of applications.

    Estco Enterprises offers square, round, and rectangular thermoplastic rubber feet. Square thermoplastic rubber feet feature stress-cracking resistance, great non-marking capabilities, RoHS compliance, and an 87 Shore A Monsanto santoprene construction. These feet come in heights ranging from 0.344" to 0.590", recess diameters ranging from 0.333" to 0.472", and lug diameters ranging from 0.150" to 0.210".

  • ►  Fasteners • Nylon Fasteners 

    For: Entry

    Fasteners constructed from nylon, a highly resilient, synthetic polymer that is commonly used in general, electronic, marine, and aerospace applications.

    Estco Enterprises offers locking nuts in the following configurations: gray & black nylon, nickel plated brass, RFI/EMI nickel plated brass, zinc plated steel, etc. Gray & black nylon locking nuts come in sizes/thread types ranging from PG 7 to M63 x 1.5, thicknesses ranging from 0.20 to 0.31mm, and wrench flats ranging from 0.75 to 2.95mm.

  • ►  Rubber • Rubber Bumpers 

    For: Entry

    Rubber bumpers are designed to mitigate impacts upon two or more surfaces.

    Rubber bumpers from Estco are available in stem, screw, tack, vibration, and end bumper styles. Many sizes and colors are available in each.

  • ►  Rubber • Rubber Washers 

    For: Entry

    Rubber washers are used in mechanical devices to reduce vibration and noise levels.

    Estco offers rubber washers in inside diameter sizes to 1 1/2" with a corresponding metric range. Outside diameter sizes from 1/4" to 3" are available.

  • ►  Fasteners • Inserts • Metric Threaded Inserts 

    For: Entry

    Estco Enterprises is a supplier of molded and extruded products. Metric sizes threaded inserts are available in brass or steel with thread sizes ranging from M4 x 0.7 to M6 x 1.0.