Company Profile

GE Energy

GE Energy is a supplier of power generation and energy delivery technologies in the coal, oil, natural gas, nuclear, water, wind, solar and alternative fuel industries.

For: Ge Energy

Company Info

P: 860-747-7626

GE Energy Entries

  • ►  Green Industry • Solar Equipment • Solar Panels - Modules 

    For: Entry

    Solar Panels - Modules

    GE makes solar modules in 200W, 205W, and 66W models at 600V or 1000V, all with anodized frames. Their residential roof module has 18 polycrystalline cells and a peak power of 66W at 9Volts/7.4Amps.

  • ►  Green Industry • Wind Equipment • Wind Power Equipment 

    For: Entry

    wind power equipment

    GE Energy manufactures wind turbines with rated capacities ranging from 1.5 to 3.6 megawatts and provides support services ranging from development assistance to operation and maintenance.

  • ►  Motion Control • Feedback Devices • Positioning Sensors 

    For: Entry

    Positioning Sensors

    GE Energy makes positioning sensors and transducers including rotary position transducers, valve position transducers, and DC LVDTs, for use in rotary or linear positioning of wicket gate position on turbines, or on control valves.

  • ►  Factory Automation • Inspection & Monitoring • Condition & Vibration Monitoring 

    For: Entry

    Condition & Vibration Monitoring

    GE Energy provides the Bently Nevada Asset Condition Monitoring for machinery protection and condition monitoring. Monitoring systems include 3500, 3300, 1900 and 1701 FieldMonitor series for continuous on-line monitoring solutions, Trendmaster Dynamic Scanning Module for periodic on line scaning system, hand held diagnostic and data collection products and non-current monitoring systems. Bently Nevada also has wireless and portable condition monitoring. In addition, sensors, transducers, test and calibration equipment and custom products are available.

  • ►  Motors • Induction Motors • Squirrel Cage Induction Motors 

    For: Entry

    Squirrel Cage Induction Motors

    The GE squirrel cage induction motor is typically used for driving pumps, fans and compressors. These are large, industrial motors that come in horizontal and vertical, and solid and hollow shaft configurations. They are rated from 100 - 20,000 hp, and up to 16,000 volts.

  • ►  Motors • Metric (IEC) Motors 

    For: Entry

    Metric motors are motors designed in metric sizes rather than imperial measurements.

    GE Industrial manufactures two IEC severe-duty motor models available with output power ranging from 0.55 kW to 220 kW. One of the metric motor models meets or exceeds the intent of the IEEE 841-2009 standard and is designed and rated for Zone 2 and Division 2 hazardous applications - with a T3 temperature code. The other motor model meets of exceeds the requirements for most industry specifications in IEC construction.

  • ►  Switches • Safety Switches 

    For: Entry

    Safety switches can be used in a wide range of applications to turn off machinery and systems in emergency situations.

    GE Energy's line of industrial solution products features the Spec Setter brand safety switches. These switches are designed for safety applications in a variety of residential, light commercial and industrial sectors and come in a large selection of sizes and configurations.

  • ►  Switches • Safety Switches • Disconnect Switches 

    For: Entry

    GE Energy designs premium and heavy-duty, high pressure, IEC fusible, IEC disconnect, and IEC non-fusible disconnect switches. The premium and heavy-duty switches are 30-600 amperes units, while the high pressure switches feature top or bottom feed and 800-4000 amperes. The fusible switches are designed for use in stand-alone applications, and available in 30A through 200A sizes.  Disconnect switches are available in 5 amperage frames from 25A through 125A; while the non-fusible switches are designed for use in group mounting configurations with other DIN-rail mounted devices.

  • ►  Pumps • Centrifugal Pumps • Centrifugal Water Pumps 

    For: Entry

    GE Energy designs multistage centrifugal pumps for medium and large volumes, light service DVE-type centrifugal pumps for water applications, and vertical centrifugal pumps for water service applications with medium to high capacities. Depending on type, the pumps feature maximum capacity up to 44,000 GPM or 33,000 GPM. The multistage pumps are used in crude oil and water pipelines, and for plant fertilization applications.

  • ►  Electrical • Power Distribution • Transformers • Variable Voltage Transformers 

    For: Entry

    GE provides variable frequency transformers to the utility industry. They enable transmission system operators to control power flows between power grids with speed and efficiency, while simultaneously offering flexibility in providing power to meet the customer's demand.

  • ►  Electrical • Power Distribution • Transformers • Frequency Transformers 

    For: Entry

    GE Energy offer variable frequency transformers that enable transmission system operators to control power flows between power grids. The grids do not have to be synchronous. An example would be where two grids of the same nominal frequency cannot be directly connected with AC lines.

  • ►  Electrical • Solar Products • Solar Cells, Modules, & Panels 

    For: Entry

    Solar Cells, Modules, and Panels

    GE Energy makes solar modules including 200W, 205W and 66W models, available in 600V and 1000V models, for commercial grid-tied applications and more.

  • ►  Motors • Vertical Motors 

    For: Entry

    Vertical motors typically feature footless P-based mounts, and they are commonly used in pump-driving applications.

    GE Energy offers vertically mounted AC induction, hollow shaft vertical, custom vertical, and 8200-8900 frame vertical motors. ValueLine vertical hollow shaft motors feature WPI enclosures, conduit boxes with ground terminals, cast aluminum rotors, cast-iron end-shields/frames, and a 3-phase motor design. These motors can handle speeds ranging from 3600 to 1200 @ 60 Hz, horsepower ratings ranging from 5 to 300 HP, and voltages up to 460V. They have deep-well pump applications.