Company Profile

JTD Stamping Co., Inc.

JTD Stamping Co., Inc. is a ISO 9001:2008 certified supplier of steel washers. Products include precision washers, shims, gaskets, spacers & special washers in addition to belleville, metric, countersunk, flange, cup washers, bending & special washers.

For: Jtd Stamping Co., Inc.

Company Info

P: 631-643-4144
P: 866-672-8195
F: 631-643-4016
403 Wyandanch Ave.
North Babylon, NY 11704

JTD Stamping Co., Inc. Entries

  • ►  Fasteners • Washers • Square Washers 

    For: Entry

    JTD Stamping Co., Inc. offers square square, square round, and round square washers in Teflon, standard steel, stainless steel, phenolic, nylon, fibre, copper, brass, and aluminum materials.

  • ►  Fasteners • Washers 

    For: Entry

    A washer is a thin disk-shaped plate with a hole in the middle that is used to distribute the load of a threaded fastener, such as a screw or nut.

    A high precision stamping company, JTD stamping produces 1 wave, 3 wave, metric, special, belleville, standard flat, and custom washers. The company's line of special washers includes: D shape, C shape, diamond, elevator spacer slot, hexagonal, hexagonal round, high strength structural oval, notching round, octagonal round, notched round, rectangular, rectangular round, round D shape, round cup round, round keyed, round keyway, round oblong, round octagonal, round oval, round rectangular, round square, round triangular, square round, and round cup flanged.


  • ►  Fasteners • Washers • Wave Washers 

    For: Entry

    JTD Stamping Co., Inc. (JTD) manufactures one and three wave washers. JTD's washers are available in 1075/1095 spring steel, 410 stainless steel, phosphorous bronze, beryllium copper, and spring temper-302/304 stainless steel materials. JTD's one wave washers have a thickness range of 0.010 to 0.030 inches. The minimum inside diameter is 0.13 and the maximum is 0.78. The minimum outside diameter is 0.302 and the maximum is 1.190. Free height ranges from 0.058 to 0.190. JTD's three wave washers have a thickness range of 0.008 to 0.015 inches. The minimum inside diameter is 0.893 and the maximum is 0.95. The minimum outside diameter is 0.1685 and the maximum is 1.3535. Free height ranges from 0.30 to 0.213 inches.

  • ►  Fasteners • Washers • Belleville Washers 

    For: Entry

    JTD Stamping are producers of Belleville washers in 1075/1095 spring steel, 410 stainless, beryllium copper, phosphorus bronze, and spring temper 302/304 stainless steel.

  • ►  Fasteners • Washers • Metric Washers 

    For: Entry

    JTD Stamping Co., Inc. manufactures washers in aluminum, brass, stainless steel, and steel materials. Minimum inside diameter is 1.7mm and the maximum is 155mm. Minimum outside diameter is 4mm and the maximum is 250mm. Thickness ranges from 0.3 to 18 inches.

  • ►  Gaskets • Copper Gaskets 

    For: Entry

    Gaskets made from copper and copper based alloys, commonly used in automotive applications.

    JTD Stamping offers both flat and beryllium copper washers in a range of diameters and thicknesses. Beryllium alloy copper washers are non-magnetic conductors for heat and electricity, while possessing a high corrosion resistance. Flat copper washers are corrosion and crush resistance, and are designed for wood structures.

  • ►  Fasteners • Washers • Countersunk Washers 

    For: Entry

    JTD Stamping Co., Inc. offers 316 stainless steel and high carbon washers for a variety of stamping applications. These washers are constructed from the following materials: tungsten, titanium, Teflon, styrene, steel, stainless steel, rubber, copper, bronze, brass, nylon, neoprene, aluminum, beryllium copper, blue tempered spring, etc.

  • ►  Fasteners • Washers • Thrust Washers 

    For: Entry

    JTD Stamping Co., Inc. offers offers one wave, three wave, and spring washers in spring temper stainless steel, phenolic, beryllium copper, stainless steel, and spring steel materials. One wave washers are used in thrust loading for tight spaced, small deflections. Three wave washers feature a smaller deflection range and a greater load bearing capacity. These washers work well in limited deflection ranges and axial spaces.

  • ►  Gaskets • Cork Gaskets 

    For: Entry

    Cork gaskets come in a variety of sizes, shapes, and grades. These gaskets are extraordinarily recoverable and impermeable under low bolting pressures.

    JTD Stamping Co., Inc. produces high quality, competitively priced, and promptly delivered a wide range of high carbon and 316 stainless steel products, including: special/spacer washers, gaskets, shims, precision washers, 1-6 wave washers, countersunk washers, etc. JTD washers are constructed from the following materials: lead, neoprene, Alloy, aluminum, rubber, fiber, galvanized steel, stainless steel, nylon, nickel, styrene, etc.

  • ►  Fasteners • Nylon Fasteners 

    For: Entry

    Fasteners constructed from nylon, a highly resilient, synthetic polymer that is commonly used in general, electronic, marine, and aerospace applications.

    JTD Stamping Co., Inc. offers nylon washers in sizes ranging from #0 to #8. These washers come in ID sizes ranging from 0.068" to 0.656", OD sizes ranging from 0.125" to 1.469", and thicknesses ranging from 0.01" to 0.093".

  • ►  Rubber • Rubber Washers 

    For: Entry

    Rubber washers are used in mechanical devices to reduce vibration and noise levels.

    JTD offers flat neoprene rubber washers made to resist surface crushing and corrosion. These products are suitable in wooden structures where surface preservation in mandatory.

  • ►  Fasteners • Washers • Brass Washers 

    For: Entry

    JTD Stamping Co., Inc. is a ISO 9001:2008 certified supplier of metal stamping products including brass washers. Product offerings include metric brass washers featuring inner diameters from 1.7mm to 155mm and outer diameters from 4mm to 714mm

  • ►  Fasteners • Washers • Stainless Steel Washers 

    For: Entry

    JTD Stamping Co., Inc. is a manufacturer of standard and custom stainless steel washers in different styles including one wave, fender, metric and belleville. All of these washers are available in a multitude of different thicknesses, diameters and can be constructed from several different materials.

  • ►  Gaskets • Aluminum Gaskets 

    For: Entry

    Aluminum gaskets are often used in standard and moderately high temperature applications such as drain plugs and automobiles.

    JTD Stamping manufactures gaskets, washers, shims and spacers from aluminum, a variety of alloys, berylium copper, brass, bronze, copper, cork, steel, iron, neoprene, nickel, stainless steel, and many other materials.

  • ►  Gaskets • Shims • Copper Shims 

    For: Entry

    JTD Stamping manufactures shims, washers, gaskets and spacers from a variety of materials, including copper, aluminum, brass, nickel, bronze, neoprene, tungsten, and many others.