Menu

Fasteners • Washers • Metric Washers

Filter by state

  • Coburn-Myers Fastening Systems, Inc.

    Coburn-Meyers Fastening Systems, Inc. manufactures metric split lock, flat, and fender washers. Washers are available in A2/A4 stainless and carbon steel materials. Finishes offered include: plain, zinc plated, and zinc dichromate. Washers have a nominal size ranging from M2.5 to M32. Metric flat washers come in small, shaft, hardened thrust, and extra thick configurations.

  • Blue Ribbon Fastener Co.

    Blue Ribbon Fastener Company is a manufacturer of flat, split lock, and interior/exterior tooth lock washers. Blue Ribbon's split lock washers are made out of black oxide zinc material.

  • Fastenal

    Fastenal manufactures a wide variety of washers, including: lock, flat, fender, belleville, load indicating, structural, bushings, finishing, beveled, square, etc. Nominal sizing options range from 1/8" to M95. Washer materials offered include: aluminum, bronze, high alloy, copper, fiber, medium carbon steel, acetal, etc. Finishing options include: galvanized, zinc, epoxy coated, plain, dacrotized, etc.

  • Superior Washer & Gasket Corp.

    Superior Washer & Gasket Corporation manufactures standard metric washers. Minimum outside diameter is 4mm and the maximum is 56mm. Minimum inside diameter is 1.7mm and the maximum is 31mm. Washer thickness ranges from 0.3mm to 4mm. Washers are available in any material.

  • JTD Stamping Co., Inc.

    JTD Stamping Co., Inc. manufactures washers in aluminum, brass, stainless steel, and steel materials. Minimum inside diameter is 1.7mm and the maximum is 155mm. Minimum outside diameter is 4mm and the maximum is 250mm. Thickness ranges from 0.3 to 18 inches.

  • Grainger Industrial Supply

    Grainger Industrial Supply is a manufacturer of bulk flat/lock/structural, conical, countersunk, flat, insulator, lock, retaining, rivet, sealing/cushioning, spherical, structural, and wave washers. Washers come in steel, low carbon steel, aluminum, material steel, neoprene, galvanized steel, etc. Washers are available in a wide variety of sizes. Finishing options include: natural, plain, passivated, mechanical zinc, etc.

  • Shamrock Industrial Fasteners

    Shamrock International Fasteners manufactures metric split lock washers. Nominal size ranges from M2 to M48. Minimum inside diameter is 2.1 and the maximum is 50.5. Minimum outside diameter is 4.4 and the maximum is 75. Thickness ranges from 0.50 to 7.

  • George H. Seltzer & Co.

    George H. Seltzer & Co. manufactures tempered steel metric washers. Washer thickness ranges from 3mm to 15mm. Minimum inside diameter is 6.4mm and the maximum is 50mm. Minimum outside diameter is 17mm and the maximum is 100mm. Bolt diameter ranges from 6mm to 48mm.

  • Willie Washer

    Willie Washer Manufacturing Corporation manufactures narrow, wide, regular, flat, machine screw, square outside diameter, medium/course type, plain, ring seals, large fender, hard and chamfered washers. Washers are available in all materials.

  • Reid Supply Company

    Reid Supply Company manufactures metric spring washers. Inside diameter sizing ranges from M4 to M12. Washers are made with spring steel material and finished in zinc chromate.

  • HK Metalcraft Manufacturing Corp.

    HK Metalcraft manufactures metric washers in 1010, 1050 steel, and 410 stainless steel materials. The minimum inside diameter is 0.290 and the maximum is 9.45. The minimum outside diameter is 0.015 and the maximum is 0.038. Washer thickness ranges from 0.105 to 3.18 and hole sizing ranges from 0.143 to 3.56.

  • Eagle Fasteners Corp.

    Eagle Fasteners Corporation offers a full line of metric flat, spring, finishing cup, shoulder, wave, lock, and special washer products. Particular product offerings include: metric flashers 316, metric fender washers 18-8SS, metric dome washer steel, metric neoprene bonded, metric flat washer PVC, metric teflon shoulder, metric star, etc.

  • Disc Lock International

    DISC-LOCK International offers washers in standard, stainless steel, and glued washer pair configurations. Standard washers range in size from 3mm to 38mm. Stainless steel washers range in size from 5mm to 16mm. Glued washer pairs range in size from 6mm to 38mm. Glued washer pairs are coated in Delta Protekt which is tested under 600 hours of salt spray.

  • Heico-Lock, Div. of Heico Fasteners

    Heico-Lock manufactures steel and stainless steel washers in standard width and large outside diameter configurations. Nominal sizing ranges from M3 to M136. Minimum inner diameter is 0.134" and the maximum is 1.701". Minimum outer diameter is 0.276" and the maximum is 7.008". Thickness ranges from 0.063" to 0.374".

  • Global Certified Fasteners

    Global Certified Fasteners provides metric washers in alloy steel, aluminum, brass, carbon/stainless steel, copper, neoprene, nylon, plastic, and rubber materials. Platings available include: black oxide, brass, cadmium, chrome, hot dip, nickel, etc. Washer types available include: wave washers, structural washers, split lock washers, etc.

  • Armour Screw Co.

    Armour Screw Company offers standard and custom metric washers.