Menu

Gaskets • Seals • Spring Energized Seals

Filter by state

  • EPM, Inc.

    EPM offers O-ring, flat wound, flat-V, and wire wound spring energized PTFE seals. Also available are hydraulic and air PTFE seals. The O-ring and flat wound designs are used for static or slow speed applications, while the wire wound 500 Series are equipped with an accelerated pitch coil spring.

  • Marco Rubber & Plastic Products, Inc.

    Marco Rubber offers teflon (PTFE) spring energized seals used in applications that require a wide temperature and pressure range with an almost unlimited chemical compatibility. Pressure ranges are offered from 3000 psi to 60,000 psi. Temperatures range from -280 F to 500 F (custom from -400 F to 600 F).

  • Saint-Gobain Performance Plastics

    Saint-Gobain offers spring energized PTFE seals for extreme service conditions. Products are available in MIL-G-5514, AS4716, Industrial, Metric, JIS, and custom gland sizes. Temperature ranges include -450 F (-268 C) to +600 C (+316 C). Pressure ranges from vacuum to 50,000 psi (3448 bar).

  • Accro-Seal, A Kalpas Co.

    AccroSeal's PTFE spring energized seals come in many configurations, including double and single bump, silicone filled, large cross section, flange, scraper, helical, wiper, piston cup, O-ring, back-up, wear band, double delta, U-packing, and metric sizes.

  • CoorsTek

    CoorsTek spring energized PTFE (teflon) products are high temperature, chemically inert, high-pressure, dynamic and static seals for demanding applications. Temperature ranges from -400 F to +600 F and pressure ranges from vacuum to 60,000 psi are available. Also sizes up to 60" durometer.

  • Daemar Inc

    Daemar spring energized seals are made with U-shaped rings. The energizing springs (in either a V or coil section) are made from stainless steel. Products come in either rod or piston configurations.