Meters • Vortex Flow Meters

Vortex flow meters are flow measurement devices employing a system of induced turbulence and a piezoelectric crystal to measure flow via frequency change in voltage.

Vortex flow meters are flow measurement devices employing a system of induced turbulence and a piezoelectric crystal to measure flow via frequency change in voltage.

Filter by state

  • GE Measurement & Control Solutions

    GE Measurement & Control offers two types of vortex flow meters: in-line Multivariable Mass and Insertion Multivariable Mass. GE's MV80 PanaFlow in-line Multivariable Mass Vortex Flowmeters features a vortex shedding velocity sensor, a solid state pressure transducer and an RTD temperature sensor, and measures velocity, pressure and temperature at a fixed location.  The GE PanaFlow MV82 Insertion Multivariable Mass Vortex Flowmeter also has the same features of the MV80, and both are designed to measure the mass flow rates of liquids, gasses and steam.

  • Emerson Process Management

    Emerson Process Management offers the Rosemount series of vortex flowmeters, including the 8800D series, the 8800 CriticalProcess, the 8800 Reducer and the 8800 MultiVariable. The 8800D series vortex flowmeter has a gasket-free meter body that's nearly immune to vibration and virtually eliminates potential leaks. The 8800 CriticalProcess Vortex Flowmeter is designed to isolate the sensor from the process area, and can almost eliminate unnecessary process downtime by removing the need to bypass the meter to perform maintenance. The 8800 reduced vortex flowmeter also features a gasket-free, vibration-immune design and are designed to measure lower flows than all other vortex meters. The 8800 MultiVariable vortex flowmeter combines temperature and flow measurement devices into a single, high-accuracy piece.

  • Sierra Instruments

    Sierra Instruments offers two VTP Multivariable Mass Vortex Flow Meters, and two Volumetric Flow Meters. The Innova-Mass VTP Multivariable Model 240 Mass Vortex Flow Meter is fully programmable, can measure any rate of liquid or gas, and can measure five process parameters at the same time, and the Inova-Mass Model 241 has the same attributes but is designed for large pipe/high pressure applications.  The Volumetric Vortex Meter Model 240V gives a direct reading of volumetric flow for steam, liquids and constant density gasses, is the Model 241V, though its designed for process piping.

  • ABB

    ABB has two styles of vortex flowmeters, TRIO-WIRL V and TRIO-WIRL Swirlmeter. The TRIO-WIRL V flowmeter have a customizable two-line LC display for measuring flowrate and totalization, and are available as a compact or remote design on 10m of cable. The TRIO-WIRL Swirlmeter has all the same features of the TRIO-WIRL V and are usually configured in 3 x DN/1 x DN layout.

  • Siemens

    Siemens has a SITRANS FX300 vortex flowmeter, designed to measure steam, liquids and gasses, available in a single or dual converter, with an integrated temperature sensor with an option for a pressure sensor.

  • KROHNE, Inc.

    Krohne Optiswirl vortex flowmaster is designed for conductive and non-conductive liquids, industrial gases, steam, heat transfer oil, compressed air, nitrogen and other liquids. It also has a integrated pressure and temperature measurement system, extreme corrosion resistance, two-wire technology and intelligent signal processing.

  • Nano-Master

    Nano-Master's Surpass vortex flowmeters are designed to be resistant against corrosive chemicals, temperature extremes and high pressure systems. All of the Surpass vortex flowmeters have wetter surfaces made of PFA and are available with or without display.

  • Onicon, Inc.

    Onicon's F-2000 series vortex flowmeters are designed to measure the mass flow of saturated steam with a precision platinum RTD. Each meter comes standard with a build-in local display and a 4-20mA analog output.

  • VorTek Instruments

    VorTek Instruments' insertion vortex flowmeters are built to measure steam, gas and liquids . The Pro-V vortex flowmaster detects shed from the bluff body, and converts it into a digital flow point.