Motion Control • Actuators • Linear Actuators

Linear Actuators

Filter by state

  • Macron Dynamics, Inc.

    Macron Dynamic Inc. manufactures single-axis linear actuators for precision and industrial-grade automation applications. Featuring vertical or horizontal motion, the actuators have breakaway torque of 42-44 oz.-in., 196 oz.-in, 12-14, 30-32 oz.-in, 8-10 oz.-in. or 32-36 oz.-in. The actuators also feature maximum speeds of 5,080 mm/sec, 10,160 mm/sec or 15,240 mm/sec.

  • Oriental Motor U.S.A. Corp.

    Oriental Motor designs and produces compact linear actuators that include a 5-phase, 24 VDC microstepping driver with photocoupler inputs. The actuators feature maximum thrust force of 3.3 lbs, 6.7 lbs., 22 lbs., or 67 lbs.

  • Exlar Corporation

    Exlar Corp. is a supplier of actuators for motion control applications. Linear actuator products available include the GSM series featuring 2.25, 3.3 and 3.9 inch frame sizes, 3, 5.9, 10, 12 and 18 inch strokes, 0.1, 0.2, 0.4, 0.5 and .75 inch lead roller screws, 7 to 75 lbf-in torque motor availability, 92 to 1983 lbf thrust capacity and front flange, rear flange, rear clevis, trunnion, side, double side or extended tie rods mounting options.

  • PI (Physik Instrumente) L.P.

    Physik Instruments designs and manufactures piezoelectric linear actuators including piezo actuators, piezo shear actuator, multi-axis actuators, piezo actuators with casing, and closed-loop actuators. The company's preloaded piezo actuators feature travel range of 90 um, pushing force of up to 3000N, and pulling force up to 700N.

  • Rollon Corp.

    Rollon Corp. manufactures five families of linear actuators all of which feature a compact, mounted T-rail and U-rail; and are used for vertical or single-axis applications. The company's standard "A" linear actuators feature load capacities of 820N, 2175N, or 55N; while the standard "C" linear actuators are available with load capacities of 350N or 700N. All the actuator families feature long trolley and double trolley actuator models.

  • Parker Hannifin Corp.

    Parker Hannifin manufactures and offers pneumatic linear actuators and electric linear actuators available as rod-style or rodless. The actuators are used in solar panel actuation, semiconductor fabrication, heavy-duty mobile equipment, and factory automation applications.

  • SKF USA, Inc.

    SKF manufactures eight families of linear actuators. Depending on model the various actuators feature force ranging from 600 N to 30,000 N, speed at maximum load of 5 mm/s to 150 mm/s, and maximum stroke of 50mm to 700mm.

  • The Precision Alliance

    TPA supplies miniature linear actuators that feature 22.5mm, 30mm, 36.5mm, or 44mm height at the carriage; and travel selectable by the millimeter up to 300mm or 500mm. Depending on model, the linear actuators are available with 1 28mm, 35mm, 42mm, or 57mm-sized motors; and a variety of ballscrew and leadscrew options. Some of the actuators are ideal for use as the base axis of an XY system where loads are cantilevered.

  • Aerotech, Inc.

    Aerotech designs and manufactures linear actuators for pick-and-place machines, gantry axes, shuttle stages, assembly machines, or as general-purpose positioners. Actuator specifications include: travel of less than 1500mm, resolution of 0.005-1um, and speed of 5 m/s.

  • Cleveland Motion Controls

    Cleveland Motion Controls develops linear actuators that feature thrust of 290 N, 670 N, 1780 N, or 3560 N. The actuators are available with speeds of 30 in/sec, 12.4 in/sec, 4.2 in/sec, 2.9 in/sec, 2.3 in/sec, 10 in/sec, 5.5 in/sec, 2.7 in/sec, 12.4 in/sec, 5.6 in/sec, 7.3 in/sec, 3.9 in/sec, 1.9 in/sec, 9.7 in/sec, or 3.9 in/sec. Maximum stroke of each actuator is 5.9 in, 10 in, or 30 in.

  • Micromo

    Micromo designs 3mm and 5mm brushless, DC motor linear actuators that feature continuous push/pull force of 41.2 N and intermittent push/pull force of 61.8 N. The actuators are used in X-Y table, medical equipment, valve control, photonics and optic device, and telecommunications equipment applications.

  • Danaher Motion

    Danaher Motion produces linear actuators and precision linear actuators designed for high and low power industrial and precision applications. The linear actuators are available in a number of stroke lengths and as AC or DC models. The precision linear actuators feature mounting flexibility ranges from rigid, externally-guided, supported loads, and pivoting loads.

  • Del-Tron Precision, Inc.

    Del-Tron Precision Inc. manufactures linear lead screw actuators that are offered in travel lengths up to 410 millimeters. The actuators feature straight-line accuracy of less than 2 microns, repeatability of less than 1 micron, and load capacities that range from 150 newtons to 900 newtons. The actuators are manufactured from corrosion-resistant aluminum and stainless steel.

  • E-Drive Design, Inc.

    E-Drive Design manufactures a line of linear actuators that feature force of 200 to 300 lbs., 400 to 2,000 lbs., 2,000 to 25,000 lbs., 4,000 to 25,000 lbs., 30,000-66,000 lbs., and 15,000 lbs. A majority of actuators feature a sealed chamber design with purge provisions, and adjustable limit switch positions.

  • Harmonic Drive LLC

    Harmonic Drive LLC manufactures four series of linear actuators that feature maximum thrust force of 49N, 3000N, and 12000N. The company's LA series of linear actuators feature 0.0174 micrometers of resolution, and are used for image instrumentation, high precision assembling, wafer position alignment, focus alignment, and driving of high precision stages.

  • Haydon Kerk Motion Solutions

    Haydon Kerk Motion Solutions produces and distributes hybrid stepper motor linear actuators that are available in six sizes - from 21 mm square to 87 mm square. The actuators feature more than twenty different travels from .00006 inch to .005 inch. The actuators are used in X-Y table, medical equipment, semiconductor handling, valve control, and telecommunications applications.

  • LINAK U.S., Inc.

    Linak U.S. Inc. develops and produces 27 different types of linear actuators. Each actuator type can be integrated into sophisticated control systems - providing accurate control and precision position feedback.

  • Ultra Motion

    Ultra Motion manufactures linear actuators that feature thrusts up to 500lbs., speeds to 20 in/sec, bi-directional repeatability of up to plus or minus .0003", and uni-directional repeatability of plus or minus .0001". The actuators are available with a range of mounting options and an adjustable slip clutch.

  • Wittenstein

    Wittenstein engineers linear actuator systems used in packaging, food and beverage, automated assembly, and automotive applications. The actuators feature an all-in-one designs that eliminated the need for separate electronic enclosures.

  • Zero Max Motion Control Products

    Zero Max Motion Control Products produces five different sized linear actuators that feature thrust capacities ranging from 5 lbs. to 200 lbs., shaft diameters from 3/8" to 2", and leads ranging from 0.025" to 6".