Motion Control • Controllers • Ethernet Controllers

Ethernet Controllers

Filter by state

  • National Instruments Corp.

    National Instruments offer Ethernet motion controllers with scalable Ethernet motion control with PXI, and up to 24 axes of motion control with a 4-slot PXI chassis.

  • Baldor

    Baldor's ethernet motion controls utilize EPL's real-time networking performance over a 100 Mbit Ethernet physical layer; up to 16 axes can be interpolated from one motion controller. EPL (Ethernet Powerlink) can support indexing drives also, which allows one motion controller to control dozens of axes.

  • Active Robots

    Active Robots offers several motion control systems with ethernet interfaces. The control cards offered by this UK company include up to 3-axes, for brushed & brushless DC motors. Their FMod-IPECMOT 48/10 card encompasses both the motor controller (position, speed) and the power level and uses standard Ethernet protocols (TCP-IP, UDP, HTTP).

  • Vital Systems Inc

    Vital Systems offers the DSPMC/IP, an Ethernet based motion control and data acquisition product featuring PLC ladder logic programmable I/O. This 1- to 6-axis Ethernet motion controller is available in two models, both of which include features suchs as 8 Channels of Servo Drive Analog Outputs, range ±10V, 14-Bit resolution, and 48 digital I/O (32 inputs & 16 outputs).

  • Parker Hannifin Corp.

    Parker provides ETHERNET Powerlink, a high-speed, digital motion-bus product that connects a motion controller to multiple drives and I/O points using standard Ethernet networking hardware. THe EPL motion controller is capable of generating motion trajectories for all axes, and synchronizing positions of multiple axes.

  • Performance Motion Devices (PMD)

    PMD motion control cards provide multi-axis motion control for DC brush, brushless DC, step, and microstepping motors used for scientific, automation, industrial and robotic applications. Their motion cards include programmable stand-alone models such as the Prodigy/CME and PC/104 Motion Cards which are available in 1, 2, 3, & 4 axis versions. All PC/104 card are equipped with Pro-Motion® GUI, C-Motion® API, and VB-Motion® development software. They communicate via 16-bit parallel, Ethernet, serial, and CANbus and are used in embedded systems.

  • EtherCAT Technology Group

    EtherCat offers Ethernet motion controllers in heavy-duty PLC as well as combined HMI - PLC versions, field bus and drive configuartions, and optional CAN connection. Units feature tolerances to ambient temperature of 0 to +50°C. EtherCat also offers Moog programmable multi-axis controllers.

  • PMC Corporation

    PMC offers the MultiFlex ETH 1000 Ethernet model series as a part of their MultiFlex Series of motion controllers. The total axes of models MultiFlex ETH-1040, -1400, -1440, -1800 and -1840 are 4 and 8; 1 to 12 axes customized models. Their Ethernet models feature specifications such as 64-bit floating-point RISC CPU and vary in the number of analog servo channels from none to 8, likewise for PWM channels and stepper/servo - 0 to 8 available.

  • Schneider Electric

    Schneider Electric's TLCC motion controller and TLM multi-axis models offer Ethernet TCP/IP with OPC server or Profibus DP for networking with hosts. The Lexium Motion Controller as a CANopen master can coordinate up to 32 drives or control I/O modules; an Ethernet and a Modbus interface are available for networking with master systems. The TLM controller is also a CANopen master and can coordinate up to 126 drives or I/O modules.

  • Galil Motion Control

    Galil offers series of controllers with 1 to 8 axis, featuring 10/100Base-T Ethernet/RS232 port up to 115/19.2 kbaud, with configurations for step or servo motors, brush and brushless, up to 500 Watts.

  • carries Ethernet controllers like Galil's DMC-2200 stand-alone motion controller. This Optima Series controller features 10Base-T or 100Base-T Ethernet, and has an internal power supply under ruggedized casing for direct connection to 90-250 V AC. The DMC-2200 controllers accomodate 1- thru 8-axes and control of step or servo motors on any combination of axes.