Motors • Brake Motors

Brake motors are commonly designed to be mounted on a motor shaft between motor and reducer to automatically engage when electric current is turned off or lost.

Filter by state

  • Oriental Motor U.S.A. Corp.

    Oriental Motor U.S.A. Corp. offers electromagnetic brake and clutch & brake motors. Electromagnetic brake motors come in the following three configurations: V Series, World K Series, and BH Series. These motors have frame sizes ranging from 1.65" to 530 lb-in, output power ranges from 6 to 90 W, and rated torques from 0.36 to 350 lb-in. Clutch & brake motors have holding brake torques of 201 oz-in, rated speeds up to 500 RPM, up to 90 W of output power, and single-phase voltages of 110/115 VAC.

  • Electric Motor Warehouse

    Electric Motor Warehouse offers brake motors in a variety of configurations, including: Three Phase TEFC, Three Phase ODP, Three Phase C-Face, Three Phase TEFC, Three Phase C-Face ODP, and Single Phase. These motors have brake ratings ranging from 3 to 50 ft-lbs, horsepower ratings ranging from 1/3 to 10 HP, RPM ratings up to 1760, and AMPS @ 230 V ranging from 1.3 to 28. Electric Motor also offers C-Face coupler brakes.

  • Baldor

    Baldor electric offers a wide range of brake motor configurations, including: VEBNM3538, BM3569, BM3568, BL3517, and BL3516. Motors have voltages up to 460 V, horsepower outputs up to 0.5 HP, and speeds up to 1765 RPM. Additional motor features include: NEMA BA dimensions, spring set, power-off operation, manual release, automatic reset, etc. Motors have the following applications: door operators, conveyors, machine tools, speed reducers, quick stops, positive hold, etc. Other motor offerings include: CEWDBM3538, BL3518, KBM3454, VBM3108, BM3546T, etc.

  • M.G.M. Electric Motors

    M.G.M. Electric Motors offers BA Series and BM Series brake motors. These motors have the following features: a power range from 0.12 to 60 HP, a TEFC design, single/two speed options, a manual brake release, NEMA-MG1 electrical standards, a low rotor inertia, compact or oversized conduit boxes, etc. Motors have the following typical applications: crane hoist, transfer cars, winches, synchronized systems, conveyors, packaging machinery, palletizers, rapid cyclic start/stop, standard induction duty, trolley, etc.

  • Grainger Industrial Supply

    Grainger Industrial Supply offers Marathon Electric brake motors in the following models: 5K49PN4564A, 5K49PN4565, 5KE49WN4571A, 5K49NK4573A, and 5K49MN6369A. These brakes have horsepower ratings up to 2 HP, RPM ranges from 1000 to 1800, NEMA/IEC frames ranging from 56 to 145TC, and voltages ranging from 208 to 230/460. Additional motor options include: base mounting CW/CCW rotation, ball bearings, totally enclosed, non-ventilated, fan-cooled, etc.

  • Demag Cranes & Components Corp.

    Demag Cranes & Components Corp. offers Conical Rotor types of brake motors. These motors have the following benefits: a short overall length, a long brake lining service life, unaffected by temporary overload, a high braking energy, a high switching frequency, no additional motor temperature rise, no separate controls, etc. Motor outputs are graded according to the IE classification, they are available as pole changing units or with a flywheel, and they have high-quality aluminum alloy frame housings.

  • WEG Electric Corp.

    WEG Electric Corp. offers three-phase/high efficiency brake motors. These motors have an ambient temperature rating of 104°F, a voltage range from 208 to 575 V, they allow altitudes to 3300 ft, and a maximum service factor of 1.25. They are constructed from stainless steel, enamel alkyd resin, carbon steel, aluminum, and cast iron materials. Motor applications include: material handling equipment, machine tools, gear reducers, and conveyors.

  • ABB

    ABB offers brake motors. Motors have an IP 55 protection, a frequency range from 50 to 60 Hz, voltages up to 690 V, and an output power range from 0.055 to 22 kW. Additional features include: anywhere from 2 to 8 poles, a frame size range from IEC 63 to 180, a hand release, a wide terminal box, etc.

  • Leroy-Somer

    Leroy-Somer offers asynchronous brake motors in the following configurations: general use single/three-phase, lifting use, translation use, variable speed, Atex, variable speed Atex, food industry, and machine tool. LS FMC asynchronous brake motors have power ratings ranging from 0.06 to 0.37 kW, frame sizes ranging from 56 to 71, 4-6 poles, and 200/400 V voltages. These motors are constructed from aluminum, steel, plastic, rubber, zinc plating, and copper materials.

  • Leeson Electric, A Regal Beloit Co.

    Leeson Electric offers single-phase brake motors. These motors have horsepower ratings ranging from 1/3 to 1.5, speeds up to 1800 RPM, frame sizes from 56C to 145 TC, and voltages ranging from 115 to 230 V. Additional features include: UL recognition, a steel frame construction, Class F insulation, NEMA Design B performance, a drive-end C-Face, etc. Motors have applications for industrial machinery, cranes, speed reducers, door operators, machine tools, and conveyors.

  • All-Lift Systems

    All-Lift Systems offers Demag conical rotor brake motors. These motors have horsepower ranges from 0.6 to 68 HP, IEC frame sizes ranging from 71 to 225, a low inertia, and single or two-speed configurations.

  • Romanoff Industries

    Romanoff Industries offers a variety of brake motors. These motors have horsepower ratings ranging from 0.5 to 250, RPMs ranging from 900 to 1800, and voltages ranging from 208 to 575. Available enclosure options include: TEFCBB, TENVBB, DPBB, TEFCBB EXP, and DPBB.

  • Brook Crompton

    Brook Crompton offers brake motors with the following features: control cards for inverter duty, a fast reaction "force voltage" option, various torque settings for rapid/softer braking, a brake kit add-on, AC/DC options, proven reliability, etc.