Pumps • Centrifugal Pumps • Multi-Stage Centrifugal Pumps

Multi-Stage Centrifugal Pumps

Filter by state

  • Carver Pump Co.

    Carver Pump manufactures multi-stage, ring section centrifugal pumps that feature performance up to 1,400 GPM and heads to 3,400 feet. The pumps also feature pressures to 1,500 psig, temperatures from -20F to 300F, and speeds up to 3,500 RPM. The pumps are used in a number of applications including boiler feed, agriculture irrigation, chemical & light hydrocarbon transfer, desalination & reverse osmosis, coating & surface treatment, high rise building sprinklers, and large vehicle washers.

  • Dickow Pump Co.

    Dickow Pump manufactures multi-stage centrifugal pumps that feature radially split casing design and end suction. The pumps are used in municipal and industrial water supply applications, in pressure increasing plants, and for condensate-handling, boiler feeding and firefighting pump applications. The pumps are capable of handling nearly all liquids that are free of abrasive solids.

  • Robert Brown Associates, Inc.

    Robert Brown Associates Inc. distributes vertical multi-stage centrifugal pumps manufactured by Aurora. The pumps are for low flow, high pressure applications, and feature 3450 nominal RPM and maximum working pressure of 360 psi. The pumps also feature flow rates up to 215 GPM.

  • Aurora Pump

    Aurora Pumps manufactures vertical multi-stage centrifugal pumps that feature capacities of up to 215 GPM, heads to 800 feet, and temperatures to 250F. The pumps are used in boiler feed, chemical feed, jockey pump, condensate return, carwash and irrigation applications.

  • Bell & Gossett

    Bell & Gossett manufactures multi-stage vertical turbine pumps for cooling tower, pressure boosting, and general water service applications. The pumps feature capacities up to 10,000 GPM with heads to 150 feet per stage. The pumps also feature bronze impellers and cast iron bowls.

  • Goulds Water Technology

    Goulds Pumps manufactures horizontal split case, multi-stage centrifugal pumps; and ring section, multi-stage centrifugal pumps. The pumps feature capacities to 1100 GPM, 1500 GPM, or 2600 GPM; heads to 1640 feet, 5500 feet, or 5250 feet; and pressures to 800 psig, 2320 psig, or 2500 psig.

  • Sundyne Corp.

    Sundyne designs and manufactures multi-stage, high pressure centrifugal pumps that feature flows up to 440 GPM, 1,000 GPM, 6,604 GPM, 13,209 GPM. The pumps also feature heads to 10,000 feet, 14,500 feet, 4,920 feet.

  • Ebara Fluid Handling

    Ebara Fluid Handling manufactures multi-stage, end suction centrifugal pumps that feature flows up to 95 GPM, head to 245 feet, up to 5HP, and suction sizes of 1-1/4" to 2-1/2". The multi-stage pumps are used for pressure boosting, plant services, water supply system, liquid transfer, pharmaceutical, reverse osmosis, water reclamation, water treatment, and OEM equipment applications.

  • Finish Thompson, Inc. (FTI)

    Finish Thompson Inc. manufactures multi-stage centrifugal pumps that feature maximum flow of 61 GPM and maximum head of 98.5 feet. The pumps are available with various impeller combinations and are constructed of polypropylene or PVDF.

  • GE Co., GE Oil & Gas

    GE Oil & Gas manufactures horizontal multi-stage pumps that operate at speeds exceeding 5,000 rpm and are used for boiler feed applications. The pumps are available with an axially-split single case or a double case for light fluids or very high pressures.

  • Illinois Process Equipment

    Illinois Process Equipment distributes multi-stage, sealed centrifugal pumps manufactured by Eastern and Grundfos; and multi-stage, magnetic drive centrifugal pumps produced by Isochem.

  • Johnson Pump, an SPX brand

    Johnson Pump develops and manufactures multi-stage centrifugal pumps that are available as horizontal, vertical or self-priming versions. THe pumps feature maximum capacity of 100 m3/h, delivery head up to 340m, and maximum operating pressure of 4000 kPa.

  • Neptuno Pumps

    Neptuno Pumps designs and manufactures multi-stage centrifugal pumps that feature capacities up to 4,400 GPM, head up to 1,320 feet, power through 1000 HP, pressures up to 590 psi, temperatures to 300F, and discharges sizes from 3" to 12".

  • Paragon Pump Company

    Paragon Pump Co. produces stainless steel multi-stage centrifugal pumps in vertical or horizontal configurations. Available with up to 26 stages, the pumps are used for high building, plants, mining, city water supply systems, and irrigation.

  • Pentair Water - Myers

    Pentair Water Myers manufactures multi-stage centrifugal pumps used in high pressure washing applications and to boost water pressure in poultry houses, farms, and commercial and private home systems. The pumps feature 1" NPT suction, 1-1/4" NPT discharge, and heavy-duty motor.