Pumps • Centrifugal Pumps • Self-Priming Centrifugal Pumps

Self-Priming Centrifugal Pumps

Filter by state

  • Springer Pumps, LLC

    Springer Pumps supplies self-priming centrifugal pumps manufactured by AMT, Banjo, and Wemco. AMT self-priming pumps are designed for applications that require high volume liquid transfer, and waste water drainage processing. Pump sizes include 2 1/2", 1" to 1-1/4", 3", 1", and 1-1/2".

  • K/M Specialty Pumps and Systems, Inc.

    KM Specialty Pumps supplies self-priming centrifugal pumps manufactured by MP Pumps. The self-priming pumps head at 100 to 230 feet, and feature a flow of 100 to 750 GPM. Depending on model, the pumps can handle solids up to 0.56", 0.6", 0.625", or 0.65' in size.

  • Gainesville Industrial Electric Co.

    Gainesville Industrial Electric distributes self-priming centrifugal pumps manufactured by Marlow Pumps. Used for industrial, paper, mining, and municipal wastewater pump applications, the centrifugal pumps handle liquids that contain raw sewage, debris, sludge, and plant waste.

  • Schaerges & Vossler Pump Co.

    Schaerges & Vossler Pump Co. supplies self-priming centrifugal pumps manufactured by Crown and Shur-Prime. Crown's efficient, self-priming pumps feature a hydraulic design, capacities up to 4400 GPM, and heads to 184 feet. Depending on model, the pumps can handle spherical solids up to 3 inches in size.

  • March Pumps

    March Pumps manufactures self-priming centrifugal pumps with capacities up to 53 GPM or a maximum of 60 feet head. The pumps are used in computer cooling, photo processing, graphic printing, ion exchange recovery/development, and aquariums. The pumps are available with a 3/4HP, 1HP or 1- 1/2HP motor.

  • Sundyne Corp.

    Sundyne designs and manufactures a self-priming, magnet drive centrifugal pump that is used for transfer duty services within the HPI, CPI, and specialty process industries. The pump features flows to 264GPM and heads to 250 feet. The pump also features a maximum suction pressure of 145psi.

  • Ryan Herco Flow Solutions

    Ryan Herco Flow Solutions supplies self-priming centrifugal pumps manufactured by Banjo. Available in 3.5 HP, 5 HP, and 5.5 HP models, the self-priming pumps feature capacities of 100 GPM or 160 GPM. Ryan Herco also distributes magnetic-drive centrifugal pumps, and horizontal and vertical centrifugal recirculation pumps from more than 20 manufacturers.

  • Met-Pro Global Pump Solutions (Formerly Dean, Fybroc & Sethco Di

    Sethco Division manufactures stainless steel, self-priming centrifugal pumps that feature a maximum flow of 58 GPM, and maximum head of 36 feet. Available with a 3/4, 1, or 2 HP motor, the company's self-priming pumps are used for a number of applications including alkaline solutions, solvents, acid solutions, photo resist solutions, alkaline cleaning tank, nickel plating, pharmaceuticals, hydraulic fluids, cosmetics and agricultural chemicals.

  • U.S. Plastic Corp.

    U.S Plastic Corp. distributes Jabso-brand self-priming centrifugal pumps that are used for pump plating, lab, pharmaceutical, weak acid, alkali, and liquid fertilizer applications. Jabso self-priming centrifugal pump types supplied by USP include: epoxy unity pumps, flexible impeller pumps, flexible impeller pumps with phenolic plastic bodies, and close-couple industrial epoxy pumps. USP also distributes a Sandpiper-brand self-priming pump that features an air-operated diaphragm.

  • Gator Pump, Inc.

    Gator Pump is a manufacturer of self-priming centrifugal pumps. The company's "trailer" models are available with either 540 or 1000 RPM PTO drive, and supply large volumes of water using tractor, diesel, or electric power. The company's compact trailer models are powered by a 540 or 1000 rpm power take off shaft and are available with 4" to 16" discharge.

  • Finish Thompson, Inc. (FTI)

    Finish Thompson Inc. designs and manufactures magnetic drive, self-priming centrifugal pumps that can lift fluids from as deep as 25 feet below the pump. The pumps are capable of lifting fluids from 18 feet deep in less than 90 seconds. Depending on model, the maximum flow of a pump is 55.1 GPM, 104 GPM, 120 GPM, or 252.7 GPM. Maximum head ranges from 62.9 feet to 175.4 feet.

  • Carver Pump Co.

    Carver manufactures self-priming, end suction centrifugal pumps and self-priming, close coupled centrifugal pumps. The company self-priming, end suction pumps are used for handling water, oils, and chemicals within marine process and general industrial applications. The pump features a hydraulic performance that extends up to 2,500 GPM. The company's self-priming, close-coupled pumps feature 700 feet of head and hydraulic performance up to 5,000 GPM. The pump handles freshwater, seawater, and light hydrocarbons in commercial marine and naval applications.

  • ALEDco, Inc.

    ALEDco supplies self-priming centrifugal pumps manufactured by ABS, Crown, Barnes, Burks Pumps, and Vanton.

  • Pentair Water - Myers

    Myers manufactures a self-priming centrifugal pump that features maximum head capabilities of 178 feet, maximum pressure of 77 psi, and maximum flow capacities to 135 GPM. The self-priming pump is available with a 3/4 to 5 HP motor, which can be single or 3-phase.

  • D.L. Thurrott, Inc.

    D.L Thurrott Inc. distributes Goulds G&L self-priming, end-suction centrifugal pumps that feature flows up to 5,000 GPM and 400 feet TDH. The pumps are designed to handle water and mild chemical applications, and are available in stainless steel, cast iron or bronze constructions.

  • Illinois Process Equipment

    Illinois Process Equipment distributes self-priming, seal-type centrifugal pumps, and self-priming, magnetic-drive centrifugal pumps manufactured by Finish Thompson. Both self-priming pump types feature suction lift capabilities up to 20 feet and are used for tank car unloading and sump evacuation.

  • Progressive Pumps Corp.

    Progressive Pumps Corp. supplies self-priming centrifugal pumps manufactured by EBARA, Sherwood, Pacer Pumps, Goulds G&L, Iwaki, and March Pumps.

  • The Pump Shop, Inc.

    The Pump Shop Inc. is a distributor of commercial and industrial pumps including self-priming centrifugal pumps. The company supplies pumps manufactured by Goulds, ITT/Allis Chalmers Pumps, Yamada, FMC Pumps, MP Pumps, ITT/Marlow Pumps, Sta-Rite Pmps, LMI Pumps and Jaeger Pumps.

  • F.W. Webb Co.

    F.W. Webb Co. distributes self-priming centrifugal pumps manufactured by Groman-Rupp, Marlow and MP.

  • Met-Pro Corp.

    The Fybroc Division of Met-Pro Corp. manufactures self-priming centrifugal pumps and close-coupled, self-priming centrifugal pumps. Both self-priming centrifugal pump types feature capacities up to 1400 GPM, heads to 300 feet, and are available in six standard sizes.