Pumps • Chemical Pumps • Non Metallic Chemical Pumps

Filter by state

  • Sundyne Corp.

    Sundyne Corp. offers: KV, KMLF (low flow), KM, KF, and K Plus non-metallic chemical pumps. Pumps have flows ranging from 1 to 1,450 GPM, heads ranging from 25 to 515 ft, and a maximum case working pressure of 350 PSI. Materials include: carbon fiber reinforced ETFE, glass fiber reinforced PFA, carbon graphite, and silicon carbide.

  • Met-Pro Corp., Sethco Div.

    The Sethco Division of Met-Pro Corp. offers CPVC/PVDF vertical centrifugal pumps, and Polypro/PVDF magnetic drive pumps. CPVC/PVDF vertical centrifugal pumps have maximum flows ranging from 10 to 90 gpm, and heads up to 64 ft. These pumps have a maximum operating temperature of 210°F, and horsepower ranging from 1/20 to 7.5 HP. Polypro/PVDF self priming magnetic drive pumps have flows up to 225 gpm, heads up to 105 ft, and a horsepower range from 1/4 to 7.5 HP.The maximum operating temperature ranges from 180 to 210°F.

  • Finish Thompson, Inc. (FTI)

    Finish Thompson, Inc. offers GP Series non-metallic chemical process pumps for chemical transfer applications. These pumps accept NEMA/IEC motors, they feature flanged or threaded connections, and they have multiple available impeller diameters. The maximum flow ranges from 126.4 to 200.9 GPM, and the maximum heads range from 81.9 to 123 feet. Impellers are offered in closed and open type configurations.

  • Wilden Pump & Engineering Co.

    Wilden Pump & Engineering Co. offers Original Series and Advanced Series plastic pumps, including: A.025/P and A100P. A.025/P plastic pumps are are 1/4" in size, and their temperature limits range from -40 to +225°F. These pumps are made from polyprolene, PVDF, carbon-filled acetal, Buna-N, PTFE, and Wil-flex materials. The temperature limits range from -40 to +225F. A100P plastic pumps are 1/2" in size, they have maximum flow rates of 11.2 GPM, and a 125 PSI maximum pressure. Their temperature limits range from 10 to 350°F.

  • Met-Pro Corp., Fybroc Div.

    The Fyboc Division of Met-Pro Corp. offers fiberglass horizontal pumps for chemical process applications. These pumps come in four configurations: Series 1500 ANSI, Series 1530 close coupled, Series 2858 standard, and Series 3000 recessed impeller. Pumps have maximum working pressures of 200 PSI, working temperatures up to 250°F, heads to 400 ft, and capacities to 5000 GPM. Pumps come in a variety of standard sizes.

  • Vanton Pump & Equipment Corp.

    Vanton Pump & Equipment Corp. offers Chem-Gard thermoplastic horizontal centrifugal pumps in a variety of configurations. Pumps have applications for abrasive, aggressive, and corrosive fluids. Design options include: integral pump/shaft motor, close-coupled, self-priming, ANSI/DIN, and a variety of thermoplastic options. Features include: rated flows to 1450 gpm, temperature allowances up to 275°F, heads to 400 ft, reverse mounted seals, a sliding front bearing design, etc.

  • BJM Pumps, LLC

    BJM Pumps, LLC offers Perfecta Series non-metallic pumps for chemical applications. These pumps are virtually unbreakable, they are lightweight and compact, rust-resistant, they contain two discharge ports, and a thermal breaker incorporated into motor windings. Pumps have a horsepower rating of 0.4 HP, a 27' maximum head, a maximum of 46 GPM, and a voltage of 115.

  • Pacer Pumps

    Pacer Pumps offers a variety of chemical resistant thermoplastic pumps, including S Series self-priming centrifugal pumps. S Series pumps are constructed of Ryton, polypropylene, and polyester materials. Drive choices include: pneumatic, hydraulic, gasoline, or electric motor. These pumps get flow rates up to 280 GPM, or 120 ft TDH @ 60 Hz. They can suction lift to 25 ft. Other pump options include: hand operated, drum, vertical, magnetic, PC Series, T Series, etc.

  • Iwaki America Inc.

    Iwaki America, Inc. offers non-metallic centrifugal pumps for chemical handling applications. SMX Series non-metallic pumps are self-priming pumps that are made without mechanical seals or packing. These pumps can prime up to 13 ft per 90 seconds, they have a maximum capacity of 132 GPM, heads up to 119 ft, flows ranging from 2.6 to 5.3 GPM, and a motor speed of 3500.

  • Viking Pump, Inc.

    Viking Pump, Inc. offers universal and viking mag drive pumps. Pumps are constructed from cast iron, steel, and 316 stainless steel materials. They have a maximum speed of 1800 RPM, a maximum pressure of 200 PSI, and standard port sizes ranging from 1" to 6". Pumps have a temperature range from -60 to 500°F.