Menu

DIRECTORY

Pumps • Dewatering Pumps

Dewatering pumps are designed for clear water application with a general limit of 10% solids concentration.

Filter by state

  • BJM Pumps, LLC

    BJM Pumps, LLC offers LWA light weight submersible, KB heavy duty submersible, JH high head effluent, and Baby Series small utility dewatering pumps. Pumps have motor ratings ranging from 2 to 15 HP, rated amps up to 16, and a maximum GPM of 409. Applications include: sand dewatering, silt dewatering, coal fine dewaterine, abrasive light slurry dewatering, basin settling, retention ponds, wash down sumps, gravel dewatering, barge cleanout, tank cleanout, etc. J and R series pumps are also offered by BJM.

  • Crane Pumps & Systems, Inc.

    Crane Pumps & Systems, Inc. offers Prosser portable submersible pumps. These electric dewatering pumps are available in a variety of configurations, including: 70, 71, 125, 126, SED, Standard Line, 9-Series, and 7-Series. Pumps have flows to 1,400 GPM, heads to 240 ft, can get horsepower ratings up to 50 HP, and have a maximum discharge of 6". Applications include dewatering, waterscapes, drainage water transfer, industrial, construction, municipal, marine, utilities, mining, water treatment and landfill pollution control.

  • Weir Minerals

    Weir Minerals offers Warman SJ submersible mine dewatering pumps. These pumps are designed to perform in the most arduous submersible mine and quarry dewatering applications. They have a heavy duty construction, contain wear resistant materials, a modular design, have a silicon carbide face, and temperature sensors fitted to motor windings allowing for automatic shutdown in the event of overheating.

  • A. Y. McDonald Supply Co.

    A.Y. McDonald Supply Co. offers: high pressure, HandyMac battery powered, electric, and diaphragm dewatering pumps. High pressure pumps are capable of developing 75 lbs. of pressure at 30 GPM, can get a horsepower rating of up to 6.5 HP, and are primarily used for fire protection and irrigation applications. HandyMac battery powered pumps can get up to 1/3 HP with 1 1/2" NPT discharge, and feature a low 30-AMP current draw. Electric dewatering pumps come in 1.5 and 2 inch sizes, can get up to 1 HP, and feature a 304 stainless steel casing. Diaphragm pumps deliver up to 90 GPM, and can handle temperatures up to 180°F. Other pumps offered by A.Y. McDonald include: Submersible Sludgemaster Air-Powered, transfer pump, trash pumps, high pressure pumps, general purpose pumps, fire pumps, etc.

  • Zoeller Pump Co., Inc.

    Zoeller Pump Co., Inc. offers: Waste-Mate 264, Single & Double Seal, Sewage-Waste 600, and Aqua-Mate 211 dewatering pumps. Waste-Mate 264 pumps are available in automatic and non-automatic models, they have tank diameters ranging from 18" simplex to 48" duplex, and can achieve up to 60 gallons pumped. Single & Double seal submersible dewatering pumps allow maximum temperatures of 130°F, they are oil filled, hermetically sealed, and feature an automatic reset thermal overload protector. The Sewage-Waste 600 features a class 30 cast iron construction, a 416 stainless steel motor shaft, and a maximum temperature allowance of 104°F. Aqua-Mate 211 is available in automatic/non-automatic models, and has a maximum temperature for dewatering of 110°F. Other products offered by Zoeller Pump include: Waste-Mate 270, 4270, 292-295, 404, 4405, 4284, etc.

  • K/M Specialty Pumps and Systems, Inc.

    K/M Specialty Pumps and Systems, Inc. offers DWP/DWPM dewatering pumps. Pumps cave a 2000 GPM capacity and heads to 340 ft. They feature a heavy duty motor, tandem upper and lower tungsten carbide mechanical seals, sand guard seal housing, and a maximum water temperature of 104°F. Applications include: construction, mining, power stations, steel mills, and aquaculture.

  • D & D Machine & Hydraulics, Inc.

    D & D Machine & Hydraulics, Inc. offers trash, slurry digester, and axial flow dewatering pumps. Trash pumps range in size from 4" to 18", they feature a cast steel bearing tube, and a fabricated iron volute/impeller. Slurry digester pumps are available in 4" and 6" sizes, they feature a specially modified hydraulic motor, and a 304 stainless steel pump shaft for longer pump life. Axial flow pumps come in sizes up to 42", feature a cast bronze propeller, and a cast steel bearing tube.

  • Pioneer Pump, Inc.

    Pioneer Pump, Inc. offers dewatering pumps for construction applications. Pump options include: standard centrifugal, self-priming (P, PE, ES, and PT), pioneer prime, and hydraulic submersible. Pumps can achieve heads up to 700 ft, flow rates from 20 to 18,000 RPM, and can get up to 18" in size.

  • Pollardwater.com

    Pollardwater.com offers IPT 2" and 3" dewatering Pumps. Pumps feature either a Honda or a Briggs & Stratton engine, they can achieve up to 5.5 HP, and up to 310 GPM. Pumps are made of aluminum die cast, cast iron die cast, and EPDM materials.

  • Wastecorp Pumps, LLC

    Wastecorp Pumps, LLC offers self-priming trash pumps for dewatering applications. Pumps are available in 2" to 10" sizes and can transfer up to 3500 GPM. Standard electric and engine driven trash pump models are available. Applications include: municipal, industrial, commercial fluid transfer, wastewater, etc. Materials include: alloy steel, carbon steel, gray iron, tungsten titanium carbide, viton, and stainless steel.