Pumps • Sewage Pumps

These submersible pumps come in small, large, and chopper configurations, and they are typically used for industrial, municipal or domestic waste-water applications.

These submersible pumps come in small, large, and chopper configurations, and they are typically used for industrial, municipal or domestic waste-water applications.

Filter by state

  • The Gorman-Rupp Co.

    The Gorman-Rupp Co. offers sewage pumps in the following configurations: Ultra V Series and UltraMate self-priming centrifugal, Silent Pump portable, SF Series (Infinity) submersible, PA Series (Prime Aire) priming, and JSV Series (J Series) submersible. Ultra V Series UltraMate sewage pumps have capacities up to 1,900 GPM, heads up to 325', solids up to 3", and a cast-iron construction. Applications include: abrasive liquids, high viscosity, solids, corrosive liquids, high pressure, clean liquids, heavy solids, etc. Gorman-Rupp also offers SH Series centrifugal, HS Series submersible, JD series sewage, etc.

  • Liberty Pumps

    Liberty Pumps offers sewage pumps in the following configurations: LEH150-Series 1-1/2 HP high head, LE70-Series 3/4 HP submersible, LE50-Series 1/2 HP submersible, LE40-Series 4/10 HP submersible, and LE100-Series 1 HP submersible. LEH150-Series sewage pumps feature built-in thermal protection, permanently lubricated lower/upper ball bearings, dual shaft seals, and semi-open impellers. These pumps have 2" solids handling capabilities, 2-3" discharges, a one-piece/cast-iron construction, and lengths up to 25'. Liberty Pumps also offers LEH200-Series high head and LE100-Series submersible sewage pumps.

  • Stancor, Inc.

    Stancor, Inc. offers SCW Series non-clog waste-water, Multi-Cut Grinder submersible, and LX Series submersible non-clog/single channel impeller sewage pumps. SCW Series non-clog waste-water and sewage pumps have output ratings ranging from 1 to 5 HP, 1-3 phase options, solids handling ranging from 1.8" to 2.2", and voltages ranging from 110 to 460V. These pumps feature automatic operations, pre-installed motor protection, oil chambers with double mechanical seals, and semi-vortex impellers.

  • Tramco Pump Co.

    Tramco Pump Co. offers 2900 Series and 3100 Series industrial sewage pumps for the following applications: underpass drainage, waste treatment plants, industrial processes, sewage lift stations, etc. 2900 Series industrial sewage pumps feature 3-4" discharge pipes constructed from schedule 40 steel (hot dipped galvanized), and they are capable of passing solids up to 2-1/2" in diameter. 3100 Series industrial sewage pumps come with 20" diameter steel (heavy duty) floor plate suspension covers, 1-1/4" high accuracy shafts, and flexible coupling motors.

  • Gator Pump, Inc.

    Gator Pump, Inc. offers 2", 2-1/2", 3", and 4-16" vertical electric pumps. 2", 2-1/2", and 3" vertical electric pumps feature horsepower ratings ranging from 1 to 200 HP, heads ranging from 100 to 13,000 feet, flows ranging from 100 to 13,000 GPM, discharges ranging from 2" to 16", and a single/double suction design. 4-16" vertical electric pumps have a TEFC construction, 10 foot center line base to discharge, pump speeds ranging from 500 to 1000 RPM, and a sheave/belt speed reduction design. Applications include: livestock barns, chemical plants, oil drilling rigs, sewage lift stations, etc.

  • Robert Brown Associates, Inc.

    Robert Brown Associates, Inc. offers sewage pumps in the following configurations: hydromatic self-priming/non-clog, standard hydromatic, Fairbanks Morse recessed impeller, and Fairbanks Morse 5400 Series solids handling. Fairbanks Morse 5400 Series dry pit/solids handling pumps feature non-clog/2-3 vane impellers, bronze/cast iron fittings, and horizontal/vertical mounting options. These pumps can handle heads up to 300 feet, flows up to 75,000 GPM, and they come in sizes ranging from 2" to 42". Applications include: soft/stringy solids, primary effluent, storm water, mixed liquor, and fluids with solids.

  • K/M Specialty Pumps and Systems, Inc.

    K/M Specialty Pumps and Systems, Inc. offers standard non-clog, 520-530 Series single stage vertical/wet pit sump, and explosion-proof/non-clog sewage pumps. 520-530 Series single stage vertical/wet pit sump and sewage pumps can handle temperatures up to 180°F, flows up to 1,200 GPM, and heads up to 180 feet. They have applications for dirty liquid service, sump service (light duty), and condensate service.

  • Continental Pump Co.

    Continental Pump Co. offers Model CG pumps for the following applications: sewage, industrial waste, polluted liquids, and slurries. These pumps can handle speeds ranging from 600 to 900 RPM, flows ranging from 100 to 360 GPM, and pressures ranging from 75 to 225 PSI. They come in shaft diameter sizes ranging from 1-7/8" to 2-1/4", and they have port suction/discharge sizes ranging from 5" to 8".

  • Zoeller Pump Co., Inc.

    Zoeller Pump Co., Inc. offers sewage and de-watering pumps in eight models. Aqua-Mate model 211 sewage and de-watering pumps feature impellers, bases, and housings constructed from non-corrosive engineered plastic. These pumps can handle de-watering temperatures up to 110ºF, they have mechanical switches that are 2-pole operated, and are constructed without sheet metal parts--making them corrosion and rust-free.

  • BJM Pumps, LLC

    BJM Pumps, LLC offers heavy duty submersible sand, sludge, and slurry pumps for a wide range of abrasive applications, including: steel mills, sewage treatment plants, coal/ore slurries, dredging, quarries, mines, etc. HAZ Series heavy duty submersible pumps have motor ratings ranging from 5 to 10 HP, voltages ranging from 230 to 460, rated Amps ranging from 8.5 to 19.5, and discharge connections ranging from 3-4" NPT. These pumps can handle solids ranging from 0.875" to 1", heads ranging from 42' to 61', and flows ranging from 475 to 655 GPM.

  • F.W. Webb Co.

    F.W. Webb Co. offers 6100 Series, 6200 Series, and 6400 Series Zoeller sump and sewage pumps for municipal, industrial, commercial, and residential systems. These pumps feature flows to 3,000 GPM, discharges up to 8", and horsepower ratings up to 75 HP.

  • Allied Pump Corp.

    Allied Pump Corp. offers vertical and submersible sewage pumps for the following pump applications: waste line, water closet, laundry tray, sink, garbage disposal, etc. These pumps have flow capacities ranging from 25 to 140 GPM, heads ranging from 10 to 25 feet, motor speeds up to 1750 RPM, and 3/4 HP horsepower ratings. They are constructed from high quality stainless steel polished/ground materials, and they come in factory assembled packages.

  • Electric Incorporated

    Electric Incorporated offers commercial and industrial pumps for the following industries: waste-water treatment, municipal, manufacturing, institutional, industrial, and government. Pump types offered include: vertical, turbine, trash, sump, submersible, split case, self-priming, lobe, horizontal, grinder, food-grade, centrifugal, etc.

  • Wastecorp Pumps, LLC

    Wastecorp Pumps, LLC offers turbo flow WSL Series dry pit vertical sewage pumps for the following applications: mining, chemical, waste-water, water, manufacturing, beverage, food, agriculture, general water supply, and industrial. These pumps feature protective sleeves on the shaft, mechanical assembly seals, mixed flow high efficiency impellers, and a balanced/hydraulic design. They have motor power ratings up to 1,000 HP, connection sizes up to 36", temperatures up to 175°F, and capacities up to 12,680 GPM.