Pumps • Submersible Pumps

Submersible pumps push water to the surface from under water using a hermetic seal to keep internal components dry.

There are two types of submersible pumps: single-stage pumps and multiple-stage pumps. Utilized mainly for drainage, sewage pumping, general industrial pumping, and slurry pumping, single-stage pumps are also used with aquarium filters. Multiple-stage submersible pumps are typically used for water abstraction within a borehole or water well.

Filter by state

  • BJM Pumps, LLC

    BJM Pumps offer a variety of submersible pumps. De-watering pumps are available in high performance pumps, sump pumps and portable de-watering pumps in stainless steel for corrosive liquid applications. Agitator pumps are suited for sand, sludge and slurry removal with wear resistant impellers and agitators. Solids handling pumps feature vortex impeller pumps, grinder pumps and cutter/shredder action pumps for industrial, agricultural and domestic purposes. Chemical corrosion resistant pumps are ideal for waste water and corrosive liquid applications and feature stainless steel, titanium, Noryl, Viton, Buna N and EPDM materials.

  • Robert Brown Associates, Inc.

    Robert Brown Associates offers submersible pumps for sewage pumps, sewage grinder pumps, sump and sewage pumps, and sewage ejector pumps. Hydromatic sewage pumps (submersible) feature models with 4 inch and smaller non-clog and vortex pumps and 6 inch discharge and larger. The submersible sewage grinder pumps feature an HP range from 2 to 7.5 HP, sump and sewage pumps feature an HP range from 0.25 to 2 HP, and sewage ejector pumps feature an HP range from 1 to 7.5 HP.

  • Schaerges & Vossler Pump Co.

    Schaerges & Vossler Pump Co. distributes submersible pumps by Barnes and CAT Pumps. Barnes 3SE series of submersible pumps are horizontal discharge non-clog pumps. Barnes' pumps are built with heavy duty cast iron, stainless steel units, double seal units, temperature sensors, moisture sensors and over-sized ball bearings. For waste-water applications, Barnes pumps are offered in 2 to 8 in size range and vertical and horizontal models. CAT's K series of submersible pumps are suitable for applications from fresh water to semi dirty water in stainless steel construction.

  • SRS Crisafulli, Inc.

    SRS Crisafulli produces submersible electric and hydraulic pumps in various configurations. Crisafullii submersible electric pumps feature 72 models that vary from 2 - 6" with dual carbon, stainless steel drive shafts, ceramic motors shaft seals, steel pump case and impeller. The submersible hydraulic pumps are available in 53 models with a size range from 2 to 10 inches as well as standard duty, rugged duty and severe duty.

  • D & D Machine & Hydraulics, Inc.

    D & D Machine & Hydraulics offers its submersible trash pumps in a size range from 4 to 18 inches. Ideal for pumping water with solids, the submersible pumps can handle a wide range of de-watering from slow seepage to large volumes of water. Submersible trash pumps feature a semi-open intake design, cast steel bearing tube, stainless steel pump shat, ball bearings, fabricated iron volute and impeller and inlet screen.

  • Goulds Water Technology

    Goulds Pumps offers submersible pumps for residential water applications. The GS submersible pumps feature up to 10 HP and 5 to 80 GPM. The 4 inch submersible pumps are suited for residential, municipal and light irrigation operations while the 5 inch and larger pumps are suited for municipal water supply and larger irrigation systems.

  • K/M Specialty Pumps and Systems, Inc.

    K/M Specialty Pumps and Systems provides sump and sewage pumps for submersible conditions. Various configurations available for these pumps includes single stage, wet put, horizontal and vertical designs. These models are suited for an array of applications including condensate service, light duty, dirty liquid service, heavy duty, medium duty, non-clog sewage treatment, sludge and slurry pumping, food processing, and abrasive mixtures.

  • Robert J. Fitzmyer Co., Inc.

    Robert J. Fitzmyer Co. offers submersible pumps from manufacturers such as Gorman-Rupp, BJM, Deming, Swaby and Myers. Gorman Rupp features 400 models suited for open pits, trash handling, drilled wells, and slurries. BJM pumps includes slurry pumps, stainless steel pumps, trash pumps, solids handling pumps and de-watering pumps. Deming has available horizontal and vertical solids handling pumps. Swaby offers solids handling submersible pumps, submersible sump pumps, and explosion proof submersible pumps. Myers  submersible pumps feature non-clog and dry fit designs.

  • Grindex Pumps

    Grindex Pumps designs electrical submersible pumps in a range of drainage, sludge, slurry, corrosive fluids, and confined spaces. Drainage pumps handles waters with abrasive particles. Sludge pumps are suited for water with high solids content such as mud and sludge. Slurry pumps are suited for fluids with high abrasive solids. Line of Inox pumps are submersible drainage and sludge pump for corrosive fluids. The MSHA pumps are dewatering and sludge pumps with wet end system, single impeller adjustment screw and cartridge seal.

  • Springer Pumps, LLC

    Springer is a distributor of submersible and immersible pumps. Vendors include Camac, AMt and Sandpiper. AMT submersible pumps are designed for sump pits, drainage pits, overflow tanks, dewatering, excavation, grain elevators, construction drainage and cooling towers. Sandpiper builds the Warren Rupp SludgeMaster submersible air-powered trash pump, and the Warren Rupp PortaPump submersible battery-powered pump.

  • U.S. Plastic Corp.

    US Plastic Corp sells submersible pumps from Big John, Water Wizard, and Webster, as well as large volume chemical pumps. Their Big John pumps have a 1.5" discharge with maximum lift of 18, a polypropylene volute-base and polycarbonate cover, thermal overload protection, and comes in manual and automatic models that shut off in 2" to 3" of water.

  • The Gorman-Rupp Co.

    The Gorman-Rupp Co. offers 400 models of submersible pumps suited for open pits, quarries, trash handling, solids handling, slurries, and narrow openings. Various series of submersible pumps feature slimline, widebase, MSHA pumps and more. Submersible products include submersible, centrifugal, portable, jacketed, vortex impeller and MSHA pumps ideal for industrial, sewage, trash, and contractor applications.

  • Stancor, Inc.

    Stancor, Inc. manufactures submersible pumps in a range from 1/2 to 45 HP. The S series includes heavy duty dewatering and slurry pumps. Avenger series includes plastic submersible and sump pumps, low-suction submersible drainage pumps, multi-purpose sump pumps, centerline dewatering pumps, sewage pumps and non-clog pumps. LX series include heavy duty waste water and grinder pumps. U6K Series include chemical resistant submersible drainage pumps.

  • Tramco Pump Co.

    Tramco Pump supplies industrial sump pumps. The 500, 2500 and 3500 series are vertical sump pumps with a semi-open impeller for sump drainage, liquid transfer, dewatering and industrial process.

  • A. Y. McDonald Supply Co.

    McDonald supplies submersible pumps in various designs including bronze lead free, stainless steel, high flow, turbine pump ends, and thermoplastic designs. Various pumps feature 3 wire single phase models, 2 wire single phase models, and 3 wire three phase models as well as an array of sizes and GPM.

  • ITT Flygt Corp.

    ITT provides submersible pumps serving industries such as oil and gas, steel, sludge pumping, aftermarket services, dewatering, rental pumps and N pumps. Product line includes industrial waste water stainless steel pumps, drainage pumps, and slurry pumps. Vortex corrosion resistant pumps are made in stainless steel with a threaded cable entrance, stainless steel cable sleeve and a pH range for 2 to 14. The six models of dewatering pumps feature 1.2 to 27 HP range. Slurry pumps are suited for mineral processing, iron and steel production, power generation, mines, abrasive solids, and construction.

  • Franklin Electric Co., Inc.

    Franklin Electric distributed submersible pumps to meet almost every application. Served industries include residential waste water and clean water, industrial, commercial and agricultural. Manufacturers of submersible pumps offered feature Schaefer, FPS, Water Horse, J-Class, Wastewater Products, and FPS Irrigation and Industrial.

  • J&J Pumps Inc.

    J&J Pumps produces submersible pumps in a variety of models. Submersible turbine pumps feature cast-iron bronze fitted bowl assembly, 8000 gpm flow rate, alloy construction and 5 to 10 inch size range. Non-clog submersible sewage pumps are suited for drainage systems or raw water applications. 3 inch discharge submersible sewage pumps feature explosion proof motor, semi-open impeller, non-clog design and pump out vanes. PV submersible vortex sewage pumps feature corrosion resistance, cast iron body, thermoplastic impeller and ball bearings. 1GD dual seal submersible grinder pumps feature silicon bronze, multi vane and semi-open impeller, and dual mechanical seals. 2DW ditch wizard, submersible dewatering pump feature corrosion resistance polyurethane impeller and diffuser, dual mechanical seals and rubber liner. Submersible sump pumps feature corrosion resistance, cast iron body and thermoplastic impeller.

  • MWI Corp., Couch Pump Div.

    MWI Pumps produces submersible pumps in vertical, horizontal, canned or enclosed designs. The pumps feature stainless steel motor housings, impellers, and impeller wear rings as well as corrosion resistance, double mechanical seals, and motor stator windings. Available sizes include 8 to 60 inches.

  • Schlumberger Ltd

    Schlumberger electrical submersible pumps for various applications. EZLine electric submersible pump is suited for oil wells with 5.5 inch and larger casings, oil well with high water cut, coal bed methane wells and gas well dewatering. REDA Hotline electric submersible pumps feature abrasion resistance and bearings to withstand abrasive liquids under high temperatures. Coiled Tubing-Deployed electric submersible systems are ideal for problem wells, wells unsuitable for gas lift, and insufficient gas applications. RedaCoil ESP system is suited for high flow rate wells.