Sensors • Position Sensors • Linear Position Sensors

Filter by state

  • Everight Sensors Corp.

    Everight Position Technologies Corp. offers a variety of linear position sensors, including: L50 Cylinder clevis base mounted, L3 Cylinder embedded/port mount, L14 heavy duty/free standing, L13 modular/free standing, and L4 short range/flange mounted. Sensors have maximum operating pressures of 4000 PSIG, an operating temperature range from -40 to +125°C, a nominal frequency of 300 Hz, and a linear measurement range from 4" to 30".

  • Macro Sensors, Div. of Howard A. Schaevitz Technologies

    The Macro Sensor division of Howard A. Schaevitz Technologies offers spring loaded, miniature, and AC operated (hazardous location) LVDT position sensors. Sensors have operating temperatures ranging from -65 to 300°F, a vibration tolerance range from 20 g to 2 kHz, and ranges from ±0.050" to ±10". Sensors have the following applications: pulp mills, petrochemical process plants, gas turbine servo controls, medical equipment, machine tools, motion control, process control monitoring, etc.

  • Balluff, Inc.

    Balluff, Inc. offers Magneto-Restrictive and Magneto-Inductive linear position transducers. Generation 7 MicroPulse Magneto-Restrictive sensors have a 1" to 300" measurement length range, an M12/M16 connector, status/set-up LEDs, 150g of shock, 20g of vibration, and enhanced electromagnetic immunity. BIL Magneto-Inductive linear positioning sensors replace linear potentiometers, they have a rugged/compact housing, an output signal range from 0 to 10 V, and a 160 sa maximum working area.

  • Penny & Giles, a Curtiss Wright Controls Co

    Penny & Giles offers spring loaded linear potentiometers, hall effect linear position sensors, and draw wire linear position sensors. Sensors are available with the following features: stroke lengths ranging from 25 to 150 mm, body diameters ranging from 28 to 500 mm, a virtually infinite resolution, analog/digital outputs, IP65 protection, a -40 to +125°C working temperature range, single or dual track options, etc. Other products offered by Penny & Giles include: LVDT displacement transducers, contactless in-cylinder linear transducers, valve position transducers, etc.

  • Measurement Specialties, Inc.

    Measurement Specialties, Inc. offers AC and DC LVDTs in a variety of configurations, including: fighter aircraft throttle quadrant, right angle, aircraft thrust reverser actuator, actuator dual channel, hydraulic valve, HCD Series, etc. These transformers have the following available features: diameter from 0.375" to 1.250", they are available in ranges from ±0.050" to ±10.000", no calibration, no special signal conditioning, uni/bi-polar DC voltages, current/digital outputs, flexibility for outputs/scaling, etc.

  • Novotechnik U.S., Inc.

    Novotechnik U.S., Inc. offers non-contacting linear position sensors. FTI 10 Series sensors have the following features: temperatures ranging from -25 to +70°C, complete electrical interchangability, temperature-resistant precision, encapsulated housing, a reliable signal transmission, linearity up to 0.1%, and long-life non-contacting technology. These sensors are constructed from plastic, aluminum, and stainless steel materials.

  • Edmund Optics Inc.

    Edmund Optics, Inc. offers linear position sensor modules. These sensor modules have a broad spectral range, position values that are independent of beam size/intensity, X and Y axis beam displacement measurement capabilities, displacement signals ranging from -10 to +10 V, 1" diameter filters, and they are mountable via a 1/4-20 tapped hole.

  • Positek Ltd

    Positek, Ltd. offers a variety of linear sensors, including: slim-line, rugged submersable stand-alone, gauge head, internally mounted cylinder, short stroke, etc. Sensors are robust, accuracte, compact, and need no special sensitive magnetic components. P100 cylinder linear position sensors are available in any travel from 20 to 600 mm, they have operating temperatures ranging from -40 to +125°C, IP65/IP67 sealing, hydraulic pressures up to 30 BAR, etc.

  • BEI Sensors

    BEI Sensors offers contacting linear position sensors. Sensors allow temperatures to 300°C, 1 million meters of operational life, and they are capable of over 1 meter of travel. Sensors have applications for mechanical assembly mounting, circuit board installation, and hydraulic/pneumatic cylinder incorporation. Additional sensor features include: an active electrical travel range from 0.5" to 24", multiple termination types/mounting options, and an independent linearity range from ±0.038% to ±2%.

  • Trans-Tek, Inc.

    Trans-Tek, Inc. offers LVDTs in AC-AC and DC-DC configurations. Transducers have the following features: strokes ranging from 0.01" to 6.0", a maximum outer diameter of 0.75", excellent repeatability, analog input/output, absolute measurement, an infinite resolution, an extremely rugged transfer, and no contact between the sensing elements. Transducers have the following applications: octane analyzer, borehole extensometer, robotic cleaner, portable friction welder, force generation, automatic assembly equipment, product inspection machines, brain probing, etc.

  • Celesco Transducer Products, Inc.

    Celesco Transducer Products, Inc. offers linear potentiometers and cable extension position transducers. Linear potentiometers can get up to 50+ million cycles, OHMS ranging from 1.25 to 10k, a 0.04%-0.5% linearity range, and full stroke ranges from 0.5" to 30". SR1 Series cable extension position transducers have stroke ranges from 0 to 125", an output signal ranging from 0 to 20 mA, and a 5-30 VDC push-pull driver.

  • MTS Systems Corp, Sensors Div.

    MTS Sensor Technology Corp. offers linear position sensors in R-Series, G-Series, and E-Series configurations. RS rod-style sensors have an IP68/IP69K super-shield housing, linear/absolute measurement capabilities, non-contact sensing technology, stroke lengths to 7620 mm, operating temperatures ranging from -40 to +167°F, and a 45 N-m mounting torque. These sensors have applications for exposed outdoor environments, harsh industrial conditions, and hydraulic/pneumatic cylinders.

  • Transducers Direct

    Transducers Direct offers linear position transducers. TD390 Series low profile/short length linear position transducers have the following features: a 0.03% linearity, a high level DC output, high performance bearings, a 0.25" shaft (with an IP65 rated shaft seal), a rugged construction, temperatures ranging from -65 to 105 C, and a 40 VDC maximum applied voltage.

  • Unimeasure, Inc.

    Unimeasure, Inc. offers linear position transducers in 6 configurations. Transducers have the following features: 11-20 measurement ranges to 165', environmental sealing, best linearity, analog rotary position, digital/voltage/current outputs, indoor industrial applications, etc.