Valves • Ball Valves • V Port Ball Valves

V Port Ball Valves

Filter by state

  • Valtorc International

    Valtorc manufactures VP V-port ball valves in a 3-piece design with sizes ranging from 1/2" to 4", or flanged with sizes from 1/2" to 6". Both ball valve designs have standard V notch options of 30, 60, and 9. The company also produces series 900 V-port ball valves that feature a 300:1 turn down ratio, low pressure recovery rate, and multi-body ratings of ANSI 150/300.

  • The Valve Shop

    The Valve Shop are distributors of A-T Controls V-port ball control valves in 1/2 inch to 6 inch sizes. V-port ball control valves are offered as either weld end, threaded or flanged types. 30, 60 or 90-degree V notches are also available. V-Port ball valves are automated with electric and pneumatic modulating actuators, or are manually operated.

  • Valve Solutions, Inc.

    Valve Solutions Inc. manufactures a series of 3/4" V-port ball control valves that feature a 300 to 1 turn down ratio for precise control, low torque, and control for low pressure (300 psi) steam. Available in 15", 30" and 60" ball notches, these V-Port ball valves also feature static pressure of 500 psi and operating temperatures of 300F. The company also produces a series of V-ball control valves that feature multi-body ANSI ratings of 150/300.


    DeZURIK designs and manufactures V-port ball valves in sizes ranging from 1" to 20". Featuring flanged or flangeless designs, the ball valves have a temperature range up to 575F; pressure ratings of 285 to 740 psi; blow-out proof shaft protection; high flow capacity; splined ball-to-shaft connection; and zero backlash. V-port ball valves can be used for throttling control of fibrous suspension applications, and also for corrosive, dirty viscous, and clean liquids and gases.

  • Flowserve

    Flowserve manufactures V-port ball valves used in the agriculture, acid transfer, water treatment, bleach chemicals, pharmaceuticals, leaching acid, waste and food processing industries. Available in 1", 1-1/2", 2", 3 ", 4", and 6" sizes, the valves feature an ISO 5211 mounting pad that facilitates actuation.

  • A-T Controls, Inc.

    AT Controls Inc. manufactures V-port manual ball valves in 1/2" to 4" sizes - in a 3-piece design - and 1" to 6" sizes - in a flanged design. Available with standard "V" notch options of 30 degrees and 60 degrees, the ball valves feature 316 stainless steel and WCB construction.

  • FMC Technologies

    FMC Technologies designs and produces set-stop V-ball valves in sizes up to 3". Featuring solenoid-controlled, pneumatic/hydraulic actuators,the ball valves are for use in watertight and hazardous locations. Available as high performance and wafer-sphere types, the valves feature operating pressure of 285 psig and operating temperature of -20F to 100F.

  • Tyco Flow Control

    KTM V-port ball valves manufactures V-port ball valves that feature full bore sizes from 1" to 12", and reduced bore sizes from 1-1/2" to 20". With pressure ratings of ASME class 150/300 and a temperature range of -20F to 662F, the ball valves are used in fibrous materials, pellet state slurry, and high viscous solutions applications. The company also produces dual-V ball valves.

  • SVF Flow Controls, Inc.

    SVF manufactures V-port ball valves that feature NPT, butt weld, socket, weld, and flanged connections. Available in sizes ranging from 1/2" to 3", the ball valves feature a live-loaded stem seal, encapsulated body seal, ISO mounting pad, and blowout proof stem. The valves are used for process and industrial applications.

  • Shanghai Qiuyi Valve

    Shanghai Quiyi Valve Co. Ltd. manufactures V-type control ball valves that feature pressures of 150lbs to 1200lbs, and are available in sizes ranging from DN15-DN1200. Suitable for containing fibers and small solid particles, such as slurry medium, the ball valves have a temperature range of -26C to 300C.