Valves • Plug Valves

Plug valves are comprised of conically-tapered or cylindrical plugs rotated inside the valve body control media flow though the valve.

Plug valves are comprised of conically-tapered or cylindrical plugs rotated inside the valve body control media flow though the valve.

Filter by state

  • Homestead/Mosser Valve

    Homestead Valve offers a line of plug valves that includes eccentric plug valves; two-way, three-way, and four-way lubricated plug valves, steam-jacketed lubricated plug valves, diamond port lubricated plug valves, and keycentric plug valves. The various valves are available with screwed or flanged end connections.


    DeZURIK Inc. designs 3-way and 4-way tapered plug valves for throttling and diverting applications. The valves are available in 3"-16" sizes and feature a temperature range up to 400F and pressure rating of 125 psi. The company's balancing plug valves are used for adjusting and reading flow in condensers, and hot/chilled water systems; while the eccentric plug valves handle clean and dirty liquids and gases, sludges, and slurries. 100 percent port eccentric plug valves produced by the company feature a temperature range up to 250F, and pressure ratings of 175 psi or 150 psi.

  • AES Valves

    Plug valves manufactured by AES Valves include regular, short, and venturi types. All the valves are available in carbon steel and various grades of stainless steel. The regular plug valves are available in 1" to 12" sizes, and ANSI Class 600-2500. The short plug valves are available in 2" to 12" sizes, and ANSI Class 150-300. The ANSI Class 150-2500 venturi plug valves are available in 6" to 30" sizes.

  • Cameron

    Cameron-brand plug valves include four-way diverter plug valves, seat and reseat plug valves, twin seal plug valves, Truseal double block and bleed plug valves, and lubricated/non-lubricated single body/dual plug valves. The various valves are used in pipeline, liquid bulk terminal, aviation fueling, refining, oil/gas production, and custody transfer applications.

  • Teqcom Industries, div of Industrial Polymer Solutions

    Teqcom Industries' PTFE precision plug valves feature a single rising stem and tapered plug, and are available with port sizes of 1/4", 3/8" and 1/2". Designed with NPT, tube, or flared port types, the valve feature straight or angle flow.

  • Grainger Industrial Supply

    Grainger Industrial Supply distributes nut-operated and lever-operated plug valves manufactured by Val-Matic. The valves are available in 1/2" to 6" sizes.

  • Parker Hannifin Corp.

    Parker Hannifin Corp.'s PR series rotary plug valves feature a blow-out resistant seat design that allows forward flow throttling. Manufactured from ASTM A 479 stainless steel and ASTM B 16 copper alloy bar stock, the plug valves are available with CPI, A-LOK compression, and female and male NPT port connections.

  • The Specialty Mfg. Co. (SMC)

    Specialty Mfg. Co. offers one-way plug valves that feature a one-piece brass body and O-ring face seal plug design for one-way high pressure and vacuum applications.

  • Flowserve

    Flowserve distributes sleeveline plug valves, Class 150 and 300 fluoropolymer lined plug valves, and V-ported plug valves manufactured by Durco. The company also supplies Valtek-brand eccentric rotary plug valves.

  • Kennedy Valve

    Kennedy Valve-brand plug valves are available with flanged, M.J., grooved, and flanged full-port end connections. Depending on end connection, the valves are available in 3"-24", 3"-16", or 3"-12" sizes. The 3" through 8" size valves are available with lever actuators and featuring a maximum pressure rating of 100 psi.

  • Valtorc International

    Industrial plug valves produced by Valtroc International are available in sizes ranging from 1/2" to 4" in carbon steel and stainless steel. Featuring spring return or double-acting configurations, the valves' rugged construction is designed for corrosives and vacuum services.

  • GA Industries, Inc.

    GA Industries Inc. offers eccentric plug valves available with threaded ends from 1/2" to 3" and flanged or mechanical joint end from 3" to 36". The valves are built to meet or exceed American Water Works Association standard C517 requirements.

  • Emerson Process Management

    Emerson Process Management distributes Fisher flanged or flangeless eccentric plug valves built with a reversible metal or ceramic seat ring and splined shaft. Designed for severe and erosive services, the valves feature sealed bearings, an oversized one piece valve shaft, and replaceable wear resistant trims.

  • Val-Matic Valve Manufacturing Corp

    Val-Matic Valve Manufacturing Corp. designs and produces Cam-Centric plug valves available in 1/2"-54" sizes, and with flanged, mechanical joint, or threaded ends. The valves are certified per AWWA C517 proof of design and flow tested. The valves can be direct nut, worm gear, cylinder or electric actuated.

  • Henry Pratt Co.

    Plug valves offered by Henry Pratt Company include ballcentric plug valves, multiport plug valves, and PN10/16 and PN25 ballcentric plug valves. The ballcentric plug valves are available in 1/2" through 72" sizes, while the multiport valves are available in sizes 3" through 16". All the valves feature a cast iron valve body.

  • FMC Technologies

    FMC Technologies designs Weco ULT and DR plug valves for sour gas drilling, production, and well-servicing applications. Available with a single or dual-body design the quarter-turn valves feature pressures up to 20,000 psi, and threaded, wing union, or flanged ends. The company also develops three types of plug valve bars.

  • Circle Valve Technologies Inc.

    Circle Valve Technologies, Inc. is a distributor for a variety of valve manuifacturers. Available products include plug shutoff valves designed for vacuum service to 150psig featuring a ball handle, positive position indication, 1/4" and 1/2" connection sizes, brass construction an d operational temperatures up to 350ºF.

  • ACS Valves

    ACS offers their CI series rotary plug valve for use in feeding and metering. This valve is air actuated, available in heights ranging from 10" to 19", and flange sizes from 6" to 14". Available in 304 or 316 stainless steel valve housing, the interior is hard chrome coated, and comes with a manual or electrical actuator.