Valves • Solenoid Valves

Often valves are classified according to how they are actuated, which is the case for solenoid valve

There are an array of different type of solenoid valves available from the manufacturers below. You'll find product information on high pressure an miniature solenoid valves;  from companies such as ASCO, Parker and SMC; constructed of different materials, such as plastic or stainless steel solenoid valves; you'll also find solenoid valve specifications for process, high vacuum, hydraulic, oil, water, food grade, cleanroom and pneumatic solenoid valves.

Filter by state

  • Magnatrol Valve Corp.

    Magnatrol Valve Corporation manufactures an extensive line of industrial solenoid valves in 2 way, bronze and stainless steel designs, as well as normally closed and normally open configurations. Solenoid valves are offered in a size range from 1/4 to 3 inches with up to 500 psig. Other solenoid valves include pilot tap, flanged ends, din connector,  leak/dead tight, hum free, watertight/explosion proof solenoids, NEMA 4X and nickel plating.

  • Sun Hydraulics Corp.

    Sun Hydraulics provides solenoid operated valves (cartridges) in 2-, 3-, 4- and 6-way configurations. Solenoid valves include poppet, soft shift poppet, spool, soft shift spool, after check poppet, poppet with overlap, 2 position, soft shift 2 position and 3 position configurations.

  • Asco Valves

    Asco produces electronically enhanced and micro-miniature solenoid valves. Valves are configured in 2-, 3- and 4-way, manual reset, direct mount, group mounted, dust collector, condensate drain valve assemblies, isolation, medical/analytical, pinch and S series designs.

  • Clark-Cooper Corporation

    Clark Cooper manufactures a variety of solenoid valves, including general service, high pressure and rotary shaft styles. General service solenoid valves feature bronze or stainless steel materials, pipe size ranges from 1/2 to 3 inches, pressures up to 500 psig, and temperatures up to 400 degrees Fahrenheit.

  • Parker Hannifin Corp.

    Parker manufactures the VA01 Series solenoid valve for centralized vacuum systems. Their FSV Series flow sensing valves assist in maintaining an acceptable vacuum level in the vacuum system if vacuum cup does not make a proper seal. Their CH Series check valves are used to hold a degree of vacuum when the vacuum generator is turned off.

  • Danfoss

    Danfoss supplies a range of solenoid valves with electrical coils. Extensive product selection includes: EV210A direct operated 2/2 way compact solenoid valves, EV220A of compact indirect servo operated 2/2 way solenoid valves; EV310A small competitive, direct-operated 3/2-way; EV210B direct-operated 2/2-way; and many others.

  • Gems Sensors & Controls

    Gems Sensors & Controls provides solenoid valves with 2 way, 3 way normally closed, 3 way normally open, 3 way multipurpose and 3 way directional control configurations. Selection of solenoid valves includes A series, B series, D series, Chem-S, BS series, M series, EH series, GH series, B Cryo series and D Cryo series. Body materials include 303 stainless steel, Isoplast, polypropylene, brass, nickel plated brass and 430F stainless steel. Fluid connections includes 1/8" NPT, 1/4" NPT, and 1/8" barb fittings. Seal and O-ring materials include Viton, Rulon/Viton and Rulon/Variseal.

  • Peter Paul

    Peter Paul produces an extensive line of solenoid valves. Peter Paul series 20, 30 and 70 solenoid valves feature two way normally open and closed, three way normally open and closed, three way directional control and three way multi-purpose configurations. Solenoid valves are available in brass, stainless steel and plastic bodies. High pressure valves consist of bubble tight sealing, psi up to 3000 and designs including two way normally open, two way normally closed and three way normally closed. Peter Paul series 50, 15 and 58 of miniature solenoid valves are available in 2 and 3 way constructions, in brass and stainless steel materials, and also in screw-in or cavity manifold configurations.

  • Ives Equipment Corp.

    Ives Equipment Corp. is a US based stocking distributor of industrial parts and components. Product offerings include solenoid valves and controllers as well as a variety of other valve and controller products.

  • Plast-O-Matic Valves, Inc.

    Plastomatic Valves, Inc. offers True Blue solenoid valves for flow control in various body designs and coil combinations. The True Blue series of valves are 1" NPT pilot-operated solenoid valves with PVC body designs and FKM seal designs. Series EAST valves are compact plastic solenoid valves with high pressure ratings, PTFE bellows barrier seals, and Fail Dry safety vents. Series EASMT are suited for high flows and high pressures and available in ½", ¾" and 1" sizes. The EASYMT series are suited for high flows and high flow rates and available in ¼" and ½" sizes. With bubble tight shutoff, Series PS features  PTFE bellows dynamic seal and upper diaphragm seal with Fail Dry safety vent, and is available in ½", ¾", 1", 1½", 2" and 3" sizes. Suited for pressure, drain or vacuum service, the Series EASY-NO (normally open) features a tight shutoff, PTFE shaft, a 4 u-cup seal, plus upper seal with Fail Dry safety vent and ¼" and ½" NPT sizes. The Series THP 3-way design features a non-sticking shaft with an upper and lower diaphragm, and secondary seals with Fail Dry safety vents in ¼" and ½" NPT sizes.

  • Spartan Scientific

    Spartan Scientific offers a selection of solenoid valves , solenoid operators, diaphragm process valves, air piloted solenoid valves, direct acting solenoid valves, media separated valves and drain valves. Solenoid operators of Series 2500, 3800 and 4000 includes sub-micro solenoid operators and solenoid operators suited for 3 and 4 way pneumatic directional control, spool valves and directional control valves. Spartan's diaphragm valves have a port range of 1/8 to 2 inches and materials of brass and stainless steel. Spartan's air piloted valves have a port range of 1/4 to 2 inches and various valve designs.

  • Valcor Engineering Corp

    Valcor Engineering Corporation supplies  solenoid valve types such as general & multi purpose, cryogenic service, diaphragm isolated, instrumentation class and Teflon isolated. General/multi purpose solenoid valves are available in stainless steel or brass body construction, designs of 2 way, 3 way and 4 way, and seal materials of Buna, Viton, EPR, Teflon and Rulon. Cryogenic solenoid valves are operated with normally open and normally closed configurations with a fluid temperature range from –450°F to 400°F. Instrument valves range in sizes from  3/4” to 1.5 ”, as well as normally closed, normally open, three way, alternate mounting and manifold configurations. Diaphragm isolated solenoid valves are offered in normally closed, normally open and three way designs. Teflon diaphragm isolated solenoid valves feature all Teflon construction, low internal volume, low wattage, and designs including normally closed, normally open and three way.

  • Georg Fischer Piping Systems

    Georg Fischer offers its solenoid pilot valves in Type PV94 and PV95. The solenoid pilot valve Type PV94 features Port P compressed air connection, Port A actuator connection, connector plug, adapter and poly-amid/brass valve materials. The solenoid pilot valve Type PV95 in 3/2 way design features Port P compressed air connection, Port A actuator connection, connector plug, adapter and brass valve materials.

  • Westfield Hydraulics Inc.

    Westfield Hydraulics Inc. supplies solenoid valves in a wide range of configurations. Models include 4 way, 3 way, 2 way dual coil, diverter, hydraulic shuffle, direct drive, proportional, blower bypass, normally closed, by-pass, relief and pneumatic configurations.

  • Pneumadyne, Inc.

    Pneumadyne provides solenoid valves in 12V DC and 24V DC. Included is a series of 0-.99 SCFM, 1.0-1.99 SCFM, 2.0-2.99 SCFM, 5.0-7.50 SCFM, and latching valves, as well as manifolds and accessories. Product options include various sizes, 2 way, 3 way, normally closed, normally open and other specifications.

  • Clippard Minimatic

    Clippard supplies a line of solenoid valves in multiple designs and model types. Solenoid valves include 1/8 and 1/4 inch NPT direct acting 2-way solenoid valves, 1/8 inch NPT direct acting 2-way stacking solenoid valves, 1/8, 1/4, 3/8, and 1/2 inch 3 way solenoid valves, 1/8, 1/4, 3/8, and 1/2 inch NPT 3 way double solenoid valves, 1/8 and 1/4 inch NPT direct acting 3 way double solenoid valves, 3/8 and 1/2 inch 5 port 4-way double solenoid valves, 1/8, 1/4, and 3/8 inch 5 port 4-way single solenoid valves.

  • DEMA

    Dema manufactures solenoid valves such as high pressure valves, line strainers, manifold valves, normally closed valves and normally open valves. High pressure solenoid valves are normally closed brass valves with a 1200 psi maximum operating pressure, stainless steel sleeves and seats, and sizes of 3/8", 1/2" and 1" NPT. Their line of manifold valves includes normally closed brass manifold valves in 1, 2, 3, 4 or 5 stations in Model 492M2M and 492M2. Normally closed solenoid valves are offered in various models with a variety of voltages, body materials and maximum operating pressures. Normally open valves includes normally open brass diaphragm valves in 3/8", 1/2" and 3/4" NPT, as well as normally open high pressure piston valves rated up to 1000 psi with 3/8" NPT connection.

  • G.W. Lisk Co., Inc.

    G.W. Lisk offers a line of solenoid products such as linear solenoids, rotary solenoids, solenoid valves, AC and proportional solenoids, and military/aerospace solenoid valves. Solenoid valves feature atmospheric pressure to 40,000 psi design, hydraulic and pneumatic media, premium materials with corrosion resistance coatings, direct and pilot operation, explosion proof, fuel control, fuel shutoff valve, and heavy duty hydraulic control and advanced exhaust gas recirculation. Valve designs include normally closed and open designs as well as 2, 3, 4, and 5 way solenoid valve designs.

  • Horton Co.

    Horton includes multiple solenoid valves in its product selection. The HC1000 is a normally open solenoid activated fluid control valve suited for coil energization. Ideal for hot and cold water operations, the L10 valves are two-solenoid, pilot operated valves suited with side-by-side coils. Ideal for laundry and car wash operations, the N10 valve is a two solenoid pilot-operated mixing valve with opposed coils. Also ideal for hot and cold water operations, the N50 type valves are two-solenoid, pilot-operated valves. Ideal for ice makers, vending and dispensing, and water-spray systems, the S30 is a single solenoid type valve.

  • SMC

    SMC supplies solenoid valves and manifolds with 4 and 5 ports, 3 ports, 2 ports and proportional designs. Their numerous series' includes various mounting styles (body ported, base, manifold), sizes, actuator applications and power usage.